Bunn DUAL068000 manual SET NEW Recipe, Sizes DONE?

Page 13

PROGRAMMING THE BREWER (cont.)

SET NEW RECIPE (cont.)

8.Using (-)and (+), set the amount of brew water, in ounces, to be dispensed for that particular batch size.

9.When finished, press another batch size and re- peat step 8 for that size. Continue setting all batch sizes.

10.When finished setting all batch sizes, press and release DONE. The display should read 3 BATCH

SIZES DONE?

11.If the three batch sizes are not correct, press and release NO to return to the BREW OUNCES setup screen and repeat steps 8 through 10. If the three batch sizes are correct, press YES. This will advance to the % BYPASS function. (Refer to % BYPASS for description).

% BYPASS XX.X

(-)

DONE

(+)

3 BATCHES DONE?

NO

 

YES

SET PULSE BREW?

NOYES

P2416

12.Using (-)and (+) set the amount of bypass water (percentage) to be dispensed around the grounds for that particular batch size.

13.When finished, press another batch size and repeat step 12 for each batch to be set.

14.When finished setting each batch size, press DONE. The display should read 3 BATCHES DONE?

15.If the three batch sizes are not correct, press and release NO to return to the % BYPASS setup screen and repeat steps 12 through 15. If they are correct,

press YES. This will advance to SET PULSE BREW. (Refer to SET PULSE BREW for description).

16.To SET PULSE BREW, if setting pulse brew using EASY PULSE (brewing into a funnel) press YES and proceed with the setup instructions for SET-

TING PULSE BREW - EASY PULSE.

17.If setting pulse brew by ENTER TIMES (entering known times) press NO. The display should read ENTER TIMES. Press and release YES and proceed

with the setup instructions for SETTING PULSE BREW - ENTER TIMES. SET DRIP TIME. (Refer to SET DRIP TIME for description).

DRIP TIME X:XX

(-) DONE (+)

3 BATCHES DONE?

NOYES

(COFFEE NAME)

SETUP COMPLETE

P2418

18.The display should now read DRIP TIME, along with either the word OFF, or a time will be showing. A batch light should also be blinking.

19.Using (-)and (+), set the amount of time from when the brew spray ends to when the funnel is emptied of hot liquid for that batch size.

NOTE: Set to OFF to prevent funnel locks from engaging (to disable this function), for a particular batch size. To set to OFF, continue to press and release (-)until OFF appears on the screen.

20.When finished, press another batch size and repeat step 19 until all three sizes are set.

21.When finished setting all batch sizes press DONE. The display should read 3 BATCHES DONE?.

22.If the three batch sizes are not correct, press NO to return to the DRIP TIME setup screen and repeat steps 19 through 21.

23.If the three batch sizes are correct, press YES. The screen should show the name of the coffee being programmed (modified) along with SETUP COMPLETE.

24.After a 5 second delay, the display will advance to the next coffee name in the brewer's memory. If no other coffee names are present, the display will read THAT WAS THE LAST RECIPE, and return to the REVIEW RECIPES screen.

Page 13

41342 080108

 

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Dualtf DBC BUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Programming SwitchesScreen Programming Lockout Switch mounted on main control boardOutputs Main Screen Brew LockoutRecipes Program Functions LevelDRIP-OUT Times Continue to LevelProgramming the Brewer Program Flow DiagramProgram Flow Diagram Procedure for modifying units of measure Units Setting Units of MeasureSET NEW Recipe Procedure for Setting the RecipeRecipe Sizes DONE? SET NEW RecipeProcedure to program the coffee name Review RECIPES? No YES Procedure for reviewing recipes Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee FavorsReview Recipes WAS the Last RecipeReview RECIPES? Noyes Brew OZ Setting or Adjusting Brew VOL- UmesBypass Modifying pulse brew SET Pulse BrewNO-NAME Left Modify Show Next SET Pulse BrewSET Pulse Brew Easy Pulse Setup TIMES? SET Pulse Brew Enter TimesDONE? Batches DONE? SET PreinfusionSetup Complete Procedure to modify drip timesDrip Time now displayed on non funnel lock units as well Copy Settings no Name Coffee Settings only Procedure to assign recipesProcedure to copy settings Assign RecipesYOU SURE? Enable ADS?Are YOU SURE? SET TempSET Temp Procedure to set ready temperatureSET Ready Refill Range 20 toSpray OZ/M Single Brewers Procedure to adjust the flow rate settingSpray OZ/M Dual Brewers Bypass OZ/M Dual Brewers Bypass OZ/M Single BrewersCalibrate Flow Procedures to calibrate the sprayhead flow rateCalibrate Flow ? Brate Bypass .. Press Brew to Start Calibrate Flow Procedures to calibrate the bypass flow rateBrew Counters Procedures to view/reset the brew countersFunnel Detect Service ToolsLeft Brew Valve Procedure to test switches Service ToolsProcedures to test coil frequency Nothing PressedYES Procedure to set factory defaults Main Screen Factory DefaultsFREQUENCY?
Related manuals
Manual 10 pages 56.74 Kb Manual 9 pages 50.59 Kb

DUAL068000 specifications

The Bunn DUAL068000 is an advanced commercial coffee maker designed for high-volume environments where speed, efficiency, and quality are paramount. This dual-brew coffee maker seamlessly combines performance with innovative technologies to meet the demands of cafes, restaurants, and convenience stores.

One of the standout features of the DUAL068000 is its dual brewing capabilities. It allows for the simultaneous brewing of two different types of coffee. This flexibility is particularly valuable in busy settings where diverse customer preferences must be accommodated. Operators can brew a full pot of drip coffee while simultaneously preparing a specialty coffee drink, optimizing workflow and minimizing wait times.

Equipped with a powerful heating element, this coffee maker can brew a full 12-cup pot in under four minutes. This rapid brewing time ensures that fresh coffee is always available, keeping customers satisfied and coming back for more. The DUAL068000 utilizes a unique hot water faucet that provides water on demand, making it easy to prepare tea or other hot beverages without disruption to the brewing process.

The DUAL068000 incorporates Bunn’s patented brewing technology, which includes temperature control and precision brewing features. The machine maintains consistency in water temperature throughout the brewing cycle, ensuring optimal extraction and rich flavor profiles in every cup. Its adjustable brew time allows operators to customize the strength of their coffee according to specific needs.

In terms of durability, the Bunn DUAL068000 is built to withstand the rigors of commercial use. Made from high-quality stainless steel, it offers a robust design that is both easy to clean and resistant to wear and tear over time. The easy-to-navigate control panel provides intuitive operation, allowing staff to quickly adjust settings without extensive training.

Another key characteristic of this machine is its energy-efficient design. Bunn has incorporated features that minimize energy consumption while maximizing output, making the DUAL068000 an eco-friendly choice for coffee businesses seeking to reduce their carbon footprint.

Overall, the Bunn DUAL068000 coffee maker combines reliability, efficiency, and flexibility, making it an ideal choice for any establishment looking to serve exceptional coffee quickly and efficiently. Its advanced technology and robust build quality position it as a leader in the commercial coffee maker market.
Top Page Image Contents