Bunn DUAL068000 manual Drip Time now displayed on non funnel lock units as well, Setup Complete

Page 24

PROGRAMMING THE BREWER (cont.)

DRIP TIME (now displayed on "non" funnel lock units as well)

This function allows the setting or modification of the funnel locks to stay engaged after the end of a brew cycle. This ensures the funnel cannot be removed until after the liquid has emptied out of the funnel.

Procedure to modify drip times:

Range: OFF to 10 minutes for all three batch sizes.

NOTE: If the brewer is already in the DRIP TIMES screen, it is not necessary to follow steps 1 through 9 in this section, but proceed directly to step 10.

1.Press and hold the upper right hidden switch until the display reads UNITS. Release the switch. Press and release switch until the display reads REVIEW RECIPES.

2.Press YES to proceed. The display should now read:

NO NAME, along with MODIFY, SHOW and NEXT (SINGLE brewers)

NO-NAME LEFT, along with MODIFY, SHOW and NEXT (DUAL brewers).

3.Press and release NEXT to advance to the desired coffee name to be modified.

4.Press and release MODIFY. The display should read BREW OZ.

5.Press and release DONE. The display should read 3 BATCHES DONE?.

6.Press and release YES. The display should now read % BYPASS.

7.Press and release DONE. The display should read 3 BATCHES DONE?.

8.Press and release YES. The display should now read SET PULSE BREW.

9.Press and release NO. The display should now read DRIP TIME, along with either the word OFF, or a time will be showing. A batch light should also be blinking.

10.Using the (-)and (+), set the amount of time from when the brew solenoid shuts off to when drip-out occurs for that batch size.

11.When finished, press another batch size and repeat step 10 until all three sizes are set.

12.When finished, press DONE. The display should read 3 BATCHES DONE?

13.If the three batch sizes are set correctly, press YES. The screen should show the name of the coffee flavor being programmed (modified) along with

SETUP COMPLETE.

14.After a 5 second delay, the display will advance to the next coffee name in the brewer's memory. If no other coffee names are present, the display will read THAT WAS THE LAST RECIPE, and return to the REVIEW RECIPES screen.

 

REVIEW RECIPES?

 

NO

 

YES

EXIT TO

 

 

 

NEXT FUNCTION

 

SINGLE

 

SCREEN

 

 

 

 

BREWERS

DUAL

 

 

 

NO-NAME

 

BREWERS

 

 

MODIFY SHOW NEXT

 

 

 

 

 

NO-NAME LEFT

 

 

 

MODIFY SHOW NEXT

SCREEN DISPLAYED

PRESS

 

 

BREW OZ: XX.XX

DONE

 

 

3 BATCHES DONE?

YES

 

 

% BYPASS XX.X

DONE

 

ADVANCES TO ALL OTHER

3 BATCHES DONE?

YES

 

COFFEE NAMES PROGRAMMED

SET PULSE BREW?

NO

 

IN THE BREWER"S MEMORY

SET PREINFUSION?

NO

 

 

DRIP TIME XX.X

 

(COFFEE NAME)

 

MODIFY SHOW NEXT

(-) DONE (+)

 

 

 

 

 

 

WHEN THE LAST COFFEE

3 BATCHES DONE?

 

NAME IN BREWER'S MEMORY

NO

YES

 

IS DISPLAYED, PRESSING

 

NEXT WILL EXIT AND THE

 

 

 

 

 

 

DISPLAY WILL THEN READ:

COFFEE NAME

SETUP COMPLETE THAT WAS THE

NOTE: Set to OFF to prevent funnel locks from engag- ing (to disable this function), for a particular batch size. To set to OFF, press and release (-)until OFF is displayed.

EXITS TO THE NEXT COF- FEE NAME IN BREWER'S MEMORY. IF NO OTHER COF- FEE NAMES ARE ENTERED IN THE BREWER"S MEMORY, THE DISPLAY WILL THEN READ:

LAST RECIPE

Page 24

41342 080108

 

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Dualtf DBC BUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Switches ProgrammingProgramming Lockout Switch mounted on main control board ScreenOutputs Main Screen Brew LockoutProgram Functions Level RecipesDRIP-OUT Times Level Continue toProgram Flow Diagram Programming the BrewerProgram Flow Diagram Units Setting Units of Measure Procedure for modifying units of measureProcedure for Setting the Recipe SET NEW RecipeRecipe SET NEW Recipe Sizes DONE?Procedure to program the coffee name Review RECIPES? No YES Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee Favors Procedure for reviewing recipesReview Recipes WAS the Last RecipeBrew OZ Setting or Adjusting Brew VOL- Umes Review RECIPES? NoyesBypass SET Pulse Brew Modifying pulse brewSET Pulse Brew NO-NAME Left Modify Show NextSET Pulse Brew Easy Pulse Setup SET Pulse Brew Enter Times TIMES?DONE? SET Preinfusion Batches DONE?Procedure to modify drip times Setup CompleteDrip Time now displayed on non funnel lock units as well Procedure to assign recipes Copy Settings no Name Coffee Settings onlyProcedure to copy settings Assign RecipesEnable ADS? YOU SURE?Are YOU SURE? SET TempProcedure to set ready temperature SET TempSET Ready Refill Range 20 toProcedure to adjust the flow rate setting Spray OZ/M Single BrewersSpray OZ/M Dual Brewers Bypass OZ/M Single Brewers Bypass OZ/M Dual BrewersProcedures to calibrate the sprayhead flow rate Calibrate FlowCalibrate Flow ? Calibrate Flow Procedures to calibrate the bypass flow rate Brate Bypass .. Press Brew to StartProcedures to view/reset the brew counters Brew CountersService Tools Funnel DetectLeft Brew Valve Service Tools Procedure to test switchesProcedures to test coil frequency Nothing PressedYES Main Screen Factory Defaults Procedure to set factory defaultsFREQUENCY?
Related manuals
Manual 10 pages 56.74 Kb Manual 9 pages 50.59 Kb

DUAL068000 specifications

The Bunn DUAL068000 is an advanced commercial coffee maker designed for high-volume environments where speed, efficiency, and quality are paramount. This dual-brew coffee maker seamlessly combines performance with innovative technologies to meet the demands of cafes, restaurants, and convenience stores.

One of the standout features of the DUAL068000 is its dual brewing capabilities. It allows for the simultaneous brewing of two different types of coffee. This flexibility is particularly valuable in busy settings where diverse customer preferences must be accommodated. Operators can brew a full pot of drip coffee while simultaneously preparing a specialty coffee drink, optimizing workflow and minimizing wait times.

Equipped with a powerful heating element, this coffee maker can brew a full 12-cup pot in under four minutes. This rapid brewing time ensures that fresh coffee is always available, keeping customers satisfied and coming back for more. The DUAL068000 utilizes a unique hot water faucet that provides water on demand, making it easy to prepare tea or other hot beverages without disruption to the brewing process.

The DUAL068000 incorporates Bunn’s patented brewing technology, which includes temperature control and precision brewing features. The machine maintains consistency in water temperature throughout the brewing cycle, ensuring optimal extraction and rich flavor profiles in every cup. Its adjustable brew time allows operators to customize the strength of their coffee according to specific needs.

In terms of durability, the Bunn DUAL068000 is built to withstand the rigors of commercial use. Made from high-quality stainless steel, it offers a robust design that is both easy to clean and resistant to wear and tear over time. The easy-to-navigate control panel provides intuitive operation, allowing staff to quickly adjust settings without extensive training.

Another key characteristic of this machine is its energy-efficient design. Bunn has incorporated features that minimize energy consumption while maximizing output, making the DUAL068000 an eco-friendly choice for coffee businesses seeking to reduce their carbon footprint.

Overall, the Bunn DUAL068000 coffee maker combines reliability, efficiency, and flexibility, making it an ideal choice for any establishment looking to serve exceptional coffee quickly and efficiently. Its advanced technology and robust build quality position it as a leader in the commercial coffee maker market.
Top Page Image Contents