Bunn DUAL068000 manual Program Functions Level, Recipes, DRIP-OUT Times

PROGRAMMING THE BREWER (cont.)

PROGRAM FUNCTIONS - LEVEL 2

There are three methods of programming the vari- ous brewing parameters of the SINGLE TF and DUAL TF with Smart Funnel Brewers.

METHOD 1:

Using a Smart Funnel and a G9-2T DBC or MHG Grinder:

Certain coffee NAMES are stored in the G9-2T DBC or MHG's memory. When a particular name of coffee is ground into the Smart Funnel, that name and the batch size selected are transferred from the grinder to the programming chip located in the funnel's handle. The funnel is then inserted into the brewer's funnel rails (left side on DUAL brewers). The sensor coil on the brewer reads the information contained in the handle. This then allows the operator to set the BREW

VOLUMES, BYPASS PERCENTAGES, PULSE BREW TIMES, PREINFUSION TIMES and DRIP-OUT TIMES for that particular coffee NAME. Each coffee NAME can be set individually to provide optimum brewing quality.

RECIPES

This diagram allows for the creating, modifying, or viewing of recipes in the brewer.

METHOD 2:

Using a RECIPE CARD to enter all of the brew set- tings at one time:

If using a coffee name not in the grinder's memory, the customer can obtain a RECIPE CARD from the factory with all the information needed to set up that particular coffee name. This includes the COFFEE NAME, BREW VOLUMES, BYPASS PERCENTAGES, PULSE BREW TIMES, PREINFUSION TIMES, and

DRIP-OUT TIMES.

METHOD 3:

Not using a Smart Funnel and/or a G9-2T DBC or MHG Grinder:

This allows the operator to enter ONE set of brew- ing parameters (for each side on DUAL brewers), in the event a Smart Funnel and/or a G9-2T DBC or MHG is not used with the SINGLE TF or DUAL TF Brewer. This is referred to as a NO NAME coffee flavor. If the brewer does not read the information in the funnel's handle, it automatically selects the NO NAME brew- ing parameters set up prior to brewing. This includes

BREW VOLUMES, BYPASS PERCENTAGES, PULSE BREW TIMES, PREINFUSION TIMES and DRIP-OUT TIMES for the three batch sizes.

ARE YOU CREATING OR CHANGING A RECIPE FOR A

COFFEE NAME PREVIOUSLY USED IN THIS BREWER?

DON'T	YES	NO
KNOW
	HAVE YOU RECEIVED A RECIPE CARD
	CONTAINING THE NEW RECIPE?
	YES		NO
	FOLLOW INSTRUCTIONS	DOES THE GRINDER HAVE THE
	ON THE RECIPE CARD		NAME IN ITS MEMORY?
		NO	DON'T KNOW		YES
YOU WILL MODIFY AN
	EXISTING RECIPE	YOU WILL ENTER NO		GO TO SET NEW RECIPE,
		NAME BREW SETTINGS
					AND FOLLOW THE
		FOR SINGLE BREWERS,
					INSTRUCTIONS
		NO NAME LEFT AND NO
		NAME RIGHT BREW
		SETTINGS FOR DUAL			REFER TO NAME LIST
	GO TO REVIEW RECIPES	BREWERS
					IN GRINDER MANUAL
AND FOLLOW INSTRUCTIONS
					OR
			OR

TO VIEW A LIST OF EXISTING RECIPES,	CONTACT BUNN-O-MATIC
GO TO REVIEW RECIPES	FOR ASSISTANCE
AND FOLLOW THE INSTRUCTIONS

Page 7

P2369-1

41342 080108