Bunn DUAL068000 manual Assign Recipes, Procedure to assign recipes, Procedure to copy settings

PROGRAMMING THE BREWER (cont.)

ASSIGN RECIPES

This function allows for assigning a coffee name other than NO-NAMEto the BREW switch.

Procedure to assign recipes:

1.Press and hold the upper right hidden switch until the display reads UNITS. Release the switch. Press and release switch until the display reads ASSIGN RECIPE ?.

2.Press YES to assign a recipe to the BREW switch (left BREW switch on DUAL brewers).

3.Use (-)and (+) to select recipe which you want to assign to the BREW switch.

4.For SINGLE brewers, press and release DONE when selected to advance to next function screen, ENABLE ADS. For DUAL brewers, repeat process for right BREW switch recipe selection.

COPY SETTINGS (NO NAME COFFEE SETTINGS ONLY)

This function is used on DUAL brewers only to transfer all the brew settings from a NO NAME coffee flavor programmed on one side of the brewer to the other side. A NO NAME coffee is a flavor that is not in the grinder's memory or is what appears if a Smart Funnel is not used.

For example, once the left side's 3 batch sizes are programmed (brew volumes, bypass percentages, pulse brew times, pre-infusion times, and drip-out times) for a particular NO NAME coffee, all the data can be transferred from the left side of the brewer to the right side in one step. The data can also be transferred from right to left, if the right side had been the initial set-up side. This results in less set-up time.

If two different NO NAME setups are required, one on the left, the other on the right side, it is not recommended that this function be used.

SINGLE

BREWERS

ASSIGN RECIPE?

NOYES

SELECT RECIPE

5 SEC. DELAY

NO-NAME

(-) DONE (+)

EXIT TO

NEXT FUNCTION

SCREEN

DUAL

BREWERS

ASSIGN RECIPE?

NOYES

SELECT RECIPE <-<-<-

5 SEC. DELAY

NO-NAME

(-) DONE (+)

SELECT RECIPE ->->->

5 SEC. DELAY

NO-NAME

(-) DONE (+)

EXIT TO

NEXT FUNCTION

SCREEN

Procedure to copy settings:

1.Press and hold the upper right hidden switch until the display reads UNITS. Release the switch. Con- tinue to press and release switch until the display reads COPY SETTINGS.

COPY SETTINGS?

NOYES

EXIT TO

NEXT FUNCTION

SCREEN

LEFT ->->-> RIGHT		COPY LEFT
		SIDE SETTINGS
NO	YES	TO RIGHT SIDE

LEFT <-<-<- RIGHT		COPY RIGHT
		SIDE SETTINGS
NO	YES
		TO LEFT SIDE
ARE YOU SURE?
NO	YES

TRANSFER

COMPLETE

EXIT TO

NEXT FUNCTION

SCREEN

Page 25 41342 080108