Bunn DUAL068000 manual You Sure?, Are YOU SURE?, Enable ADS?, SET Temp

Page 26

PROGRAMMING THE BREWER (cont.)

COPY SETTINGS (NO NAME COFFEE SETTINGS ONLY) (cont.)

2.Press YES in this screen. The display should read LEFT ->->-> RIGHT.

3.If the initial programming was done on the left side of the brewer, press YES. The display will read ARE

YOU SURE?

4.If you are sure that the data should be transferred from left to right, press YES. The display will then read TRANSFER COMPLETE, and will automatically advance to the next function screen.

5.In the LEFT ->->-> RIGHT screen, if the program- ming was done on the right side and it is desired to transfer from right to left, press NO. The display will then read LEFT <-<-<- RIGHT .

6.If the initial programming was done on the right side of the brewer, press YES. The display will read

ARE YOU SURE?

7.If the data should be transferred from right to left, press YES. After the data is transferred, the display will read TRANSFER COMPLETE. This will appear for 3 seconds, then will exit to the next function screen. Brew settings for all flavors are not the same on both sides of the brewer, only the NO NAME setting has been transferred.

ENABLE ADS?

This function allows the operator to choose whether or not to display the advertising message that was en- tered into the brewer with an AD CARD. This message will be displayed when the brewer is not in use.

ENABLE ADS ?

NO DONE YES

Procedure to Enable/Disable Ads:

1.Press and hold upper right hidden switch until the display reads UNITS. Release switch. Continue to press and release switch until the display reads ENABLE ADS. The YES or NO will be flashing to indicate the current selection.

2.Press and release the NO to disable this function (no ads will be displayed on the screen), or;

3.Press and release the YES to enable this function (ads will be displayed on screen).

4.When finished, press and release DONE to save the new setting, exit the ENABLE ADS function and advance to the next function screen, SET TEMP. Another alternative is to press and release the ON/OFF switch (either on DUAL brewers) located on the front switch panel to exit the ENABLE ADS function and return to the MAIN SCREEN.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

°

 

°

°

°

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SET TEMP - Range: 185˚F (85˚C) to 205˚F (96˚C) This function allows the operator to set the brew

water temperature in the tank. It also sets the hot water faucet dispense temperature.

SET TEMP: XXX° (-) DONE (+)

Procedure to set brew temperature:

1.Press and hold upper right hidden switch until the display reads UNITS. Release switch. Continue to press and release switch until the display reads

SET TEMP.

Page 26

41342 080108

 

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Dualtf DBC BUNN-O-MATIC Commercial Product Warranty Introduction Glossary Programming Switches ProgrammingOutputs Main Screen Programming Lockout Switch mounted on main control boardScreen Brew LockoutDRIP-OUT Times Program Functions LevelRecipes Level Continue toProgram Flow Diagram Programming the BrewerProgram Flow Diagram Units Setting Units of Measure Procedure for modifying units of measureRecipe Procedure for Setting the RecipeSET NEW Recipe SET NEW Recipe Sizes DONE?Procedure to program the coffee name Review RECIPES? No YES Review Recipes Review RECIPES/MODIFY RECIPES/SET UP no Name Coffee FavorsProcedure for reviewing recipes WAS the Last RecipeBrew OZ Setting or Adjusting Brew VOL- Umes Review RECIPES? NoyesBypass SET Pulse Brew Modifying pulse brewSET Pulse Brew NO-NAME Left Modify Show NextSET Pulse Brew Easy Pulse Setup DONE? SET Pulse Brew Enter TimesTIMES? SET Preinfusion Batches DONE?Drip Time now displayed on non funnel lock units as well Procedure to modify drip timesSetup Complete Procedure to copy settings Procedure to assign recipesCopy Settings no Name Coffee Settings only Assign RecipesAre YOU SURE? Enable ADS?YOU SURE? SET TempSET Ready Procedure to set ready temperatureSET Temp Refill Range 20 toSpray OZ/M Dual Brewers Procedure to adjust the flow rate settingSpray OZ/M Single Brewers Bypass OZ/M Single Brewers Bypass OZ/M Dual BrewersCalibrate Flow ? Procedures to calibrate the sprayhead flow rateCalibrate Flow Calibrate Flow Procedures to calibrate the bypass flow rate Brate Bypass .. Press Brew to StartProcedures to view/reset the brew counters Brew CountersLeft Brew Valve Service ToolsFunnel Detect Procedures to test coil frequency Service ToolsProcedure to test switches Nothing PressedYES FREQUENCY? Main Screen Factory DefaultsProcedure to set factory defaults
Related manuals
Manual 10 pages 56.74 Kb Manual 9 pages 50.59 Kb

DUAL068000 specifications

The Bunn DUAL068000 is an advanced commercial coffee maker designed for high-volume environments where speed, efficiency, and quality are paramount. This dual-brew coffee maker seamlessly combines performance with innovative technologies to meet the demands of cafes, restaurants, and convenience stores.

One of the standout features of the DUAL068000 is its dual brewing capabilities. It allows for the simultaneous brewing of two different types of coffee. This flexibility is particularly valuable in busy settings where diverse customer preferences must be accommodated. Operators can brew a full pot of drip coffee while simultaneously preparing a specialty coffee drink, optimizing workflow and minimizing wait times.

Equipped with a powerful heating element, this coffee maker can brew a full 12-cup pot in under four minutes. This rapid brewing time ensures that fresh coffee is always available, keeping customers satisfied and coming back for more. The DUAL068000 utilizes a unique hot water faucet that provides water on demand, making it easy to prepare tea or other hot beverages without disruption to the brewing process.

The DUAL068000 incorporates Bunn’s patented brewing technology, which includes temperature control and precision brewing features. The machine maintains consistency in water temperature throughout the brewing cycle, ensuring optimal extraction and rich flavor profiles in every cup. Its adjustable brew time allows operators to customize the strength of their coffee according to specific needs.

In terms of durability, the Bunn DUAL068000 is built to withstand the rigors of commercial use. Made from high-quality stainless steel, it offers a robust design that is both easy to clean and resistant to wear and tear over time. The easy-to-navigate control panel provides intuitive operation, allowing staff to quickly adjust settings without extensive training.

Another key characteristic of this machine is its energy-efficient design. Bunn has incorporated features that minimize energy consumption while maximizing output, making the DUAL068000 an eco-friendly choice for coffee businesses seeking to reduce their carbon footprint.

Overall, the Bunn DUAL068000 coffee maker combines reliability, efficiency, and flexibility, making it an ideal choice for any establishment looking to serve exceptional coffee quickly and efficiently. Its advanced technology and robust build quality position it as a leader in the commercial coffee maker market.
Top Page Image Contents