Belshaw Brothers EZ18, EZ24 Reset button Heat switch with pilot light, Heating element kettle

Page 11

Reset button

Reset button

Heat switch with pilot light

Figure 1-4. Heater head

Bleeder

Pickup tube

Heating element

kettle

Figure 1-5. Elements and kettle.

Pump switch with pilot light

Belshaw Bros., Inc. 1750 22nd Ave. S. Seattle, WA 98144 Phone 206-322-5474 Fax 206-322- 5425

EZ Melt Model EZ18, EZ24, EZ34

MN-1316EN

3

Image 11

Contents Fill and Filter Models EZ18, EZ24, AND EZ34 Operator’s ManualEZ Melt Page EQUIPMENT RECORD Page Troubleshooting ContentsInstallation CleaningFigures Preface Page heater head 1Installationfilter assembly handlehose connector Heating element kettle Reset button Heat switch with pilot lightPump switch with pilot light Figure 1-4.Heater head Bleeder Pickup tubeTo avoid electrocuting yourself or damaging Melting and Filling 2Operation7.Turn the pump on using the PUMP switch Filtering a.Allow the filter assembly to cool to the touch d.Put the filter assembly back on the EZ Melt Cleaning3 Do not touch the heating element! It is very Troubleshooting4 What To Do THE PUMP MOTOR WILL NOT RUNPossible Causes This page has been left blank intentionally Parts Lists ITEM QTY. DESCRIPTION BILL OF MATERIALDESCRIPTION FASTENERSFIGURE 5-1 EZ18-2000SHORTENING MELTER ASSEMBLY DESCRIPTION FIGURE 5-2 EZ18-2001SHORTENING MELTER ASSEMBLY DESCRIPTION FIGURE 5-3 EZ24-2000SHORTENING MELTER ASSEMBLY DESCRIPTION FIGURE 5-4 EZ24-2001SHORTENING MELTER ASSEMBLY DESCRIPTION FIGURE 5-5 EZ34-2000SHORTENING MELTER ASSEMBLY DESCRIPTION FIGURE 5-6 EZ34-2001SHORTENING MELTER ASSEMBLY FIGURE 5-7 EZ24/34-1000HEATER HEAD ASSEMBLY PARTS LIST 5-7 EZ24/34-1000HEATER HEAD ASSEMBLY EZ18-4003208/240V, 50/60 Hz, 1 Ph Wiring DiagramsEZ18-4002120V, 50/60 Hz, 1 Ph MN-1316EN EZ Melt Model EZ18, EZ24, EZ34EZ Melt Model EZ18, EZ24, EZ34 MN-1316EN