Belshaw Brothers manual Parts Lists, EZ Melt Model EZ18, EZ24, EZ34, MN-1316EN

Page 23
Parts Lists

5

Parts Lists

 

 

The following pages contain current lists of the parts that make up the EZ18, EZ24, and EZ34 models. Each list refers to an exploded-view assembly drawing. You can use the parts lists and assembly drawings as a reference to order replacement parts.

When ordering replacement parts, please provide the model number and serial number along with the correct electrical information about your equipment. Some of the part numbers vary according to the voltage, phase, cycle and serial number of the machine.

IMPORTANT

The parts lists and assembly drawings are meant as guides. We cannot provide lists and drawings for every possible configuration of the EZ Melt models.

Belshaw Bros., Inc. š 1750 22nd Ave. S. š Seattle, WA 98144 š Phone 206-322-5474 š Fax 206-322- 5425

EZ Melt Model EZ18, EZ24, EZ34

MN-1316EN

15

Image 23
Contents Fill and Filter Models EZ18, EZ24, AND EZ34 Operator’s ManualEZ Melt Page EQUIPMENT RECORD Page Troubleshooting ContentsInstallation CleaningFigures Preface Page heater head 1Installationfilter assembly handlehose connector Heating element kettle Reset button Heat switch with pilot lightPump switch with pilot light Figure 1-4.Heater head Bleeder Pickup tubeTo avoid electrocuting yourself or damaging Melting and Filling 2Operation7.Turn the pump on using the PUMP switch Filtering a.Allow the filter assembly to cool to the touch d.Put the filter assembly back on the EZ Melt Cleaning3 Do not touch the heating element! It is very Troubleshooting4 What To Do THE PUMP MOTOR WILL NOT RUNPossible Causes This page has been left blank intentionally Parts Lists ITEM QTY. DESCRIPTION BILL OF MATERIALDESCRIPTION FASTENERSFIGURE 5-1 EZ18-2000SHORTENING MELTER ASSEMBLY DESCRIPTION FIGURE 5-2 EZ18-2001SHORTENING MELTER ASSEMBLY DESCRIPTION FIGURE 5-3 EZ24-2000SHORTENING MELTER ASSEMBLY DESCRIPTION FIGURE 5-4 EZ24-2001SHORTENING MELTER ASSEMBLY DESCRIPTION FIGURE 5-5 EZ34-2000SHORTENING MELTER ASSEMBLY DESCRIPTION FIGURE 5-6 EZ34-2001SHORTENING MELTER ASSEMBLY FIGURE 5-7 EZ24/34-1000HEATER HEAD ASSEMBLY PARTS LIST 5-7 EZ24/34-1000HEATER HEAD ASSEMBLY EZ18-4003208/240V, 50/60 Hz, 1 Ph Wiring DiagramsEZ18-4002120V, 50/60 Hz, 1 Ph MN-1316EN EZ Melt Model EZ18, EZ24, EZ34EZ Melt Model EZ18, EZ24, EZ34 MN-1316EN