Belshaw Brothers EZ34, EZ24, EZ18 manual 2Operation, Melting and Filling

2Operation

Melting and Filling

1.Completely cover the heating element with shortening. There are two ways to do this:

šPre-melt some shortening in a pan on the stove and pour it into the kettle to cover the element.

šPack solid shortening tightly around the heating element and bulbs. Do not leave any air spaces. Cover the heating element at least 2”/5 cm. (See Figure 2-1)

WARNING

Air spaces can cause the shortening to

overheat and catch on fire.

2.Install the cube melter in the kettle, opposite the heater head. Push the cube melter through

the shortening so its legs rest on the bottom of the kettle. (See Figures 2-2 & 2-3.)

Figure 2-1. Packing Solid Shortening in the

Kettle.

Figure 2-2. Cube Melter

Figure 2-3. Installing the Cube Melter.

3.Position the EZ Melt near the fryer.

4.Install the supply hose. Follow these steps:

a.Attach the hose to the pump outlet by hand-tightening the hose connector.

b.Mount the nozzle of the hose on the edge of the fryer kettle with the opening inside the kettle.

Belshaw Bros., Inc. š 1750 22nd Ave. S. š Seattle, WA 98144 š Phone 206-322-5474 š Fax 206-322- 5425

EZ Melt Model EZ18, EZ24, EZ34 MN-1316EN 5