Belshaw Brothers EZ34, EZ24, EZ18 manual This page has been left blank intentionally, MN-1316EN

Page 22
This page has been left blank intentionally.

This page has been left blank intentionally.

Belshaw Bros., Inc. š 1750 22nd Ave. S. š Seattle, WA 98144 š Phone 206-322-5474 š Fax 206-322- 5425

14

MN-1316EN

EZ Melt Model EZ18, EZ24, EZ34

Image 22
Contents EZ Melt Models EZ18, EZ24, AND EZ34 Operator’s ManualFill and Filter Page EQUIPMENT RECORD Page Cleaning ContentsInstallation TroubleshootingFigures Preface Page handle 1Installationfilter assembly heater headhose connector Figure 1-4.Heater head Bleeder Pickup tube Reset button Heat switch with pilot lightPump switch with pilot light Heating element kettleTo avoid electrocuting yourself or damaging 2Operation Melting and Filling7.Turn the pump on using the PUMP switch Filtering a.Allow the filter assembly to cool to the touch d.Put the filter assembly back on the EZ Melt Cleaning3 Do not touch the heating element! It is very Troubleshooting4 Possible Causes THE PUMP MOTOR WILL NOT RUNWhat To Do This page has been left blank intentionally Parts Lists FASTENERS BILL OF MATERIALDESCRIPTION ITEM QTY. DESCRIPTIONFIGURE 5-1 EZ18-2000SHORTENING MELTER ASSEMBLY BILL OF MATERIAL FIGURE 5-2 EZ18-2001SHORTENING MELTER ASSEMBLY BILL OF MATERIAL FIGURE 5-3 EZ24-2000SHORTENING MELTER ASSEMBLY BILL OF MATERIAL FIGURE 5-4 EZ24-2001SHORTENING MELTER ASSEMBLY BILL OF MATERIAL FIGURE 5-5 EZ34-2000SHORTENING MELTER ASSEMBLY BILL OF MATERIAL FIGURE 5-6 EZ34-2001SHORTENING MELTER ASSEMBLY FIGURE 5-7 EZ24/34-1000HEATER HEAD ASSEMBLY PARTS LIST 5-7 EZ24/34-1000HEATER HEAD ASSEMBLY EZ18-4002120V, 50/60 Hz, 1 Ph Wiring DiagramsEZ18-4003208/240V, 50/60 Hz, 1 Ph EZ Melt Model EZ18, EZ24, EZ34 MN-1316ENMN-1316EN EZ Melt Model EZ18, EZ24, EZ34