MP 101, cont’d
Rack installation
The MP 101 can be rack mounted using either the VersaTools 19" 1U rack shelf (part
(part
The figure below shows the VersaTools rack shelf, and the figure on the following page shows a standard rack shelf. On the standard rack shelf, there are eight mounting locations at the front of the shelf and eight at the rear of the shelf.
1.Remove the rubber feet from the unit, if they were previously installed.
2.Mount the unit on the rack shelf, using two
3.Install blank panels (included with part
VersaTools Rack Shelf
1/4 Rack Width Front
False Faceplate
Use 2 mounting holes on | (2) |
opposite corners. | |
| Screws |