MP 101 D
About the MP 101 D
The Extron MP 101 D provides the same features as the other MP 101 models in a convenient, Decora® style wallplate. Like the MP 101 and MP 101 AAP, this mic to line preamplifier can be remotely controlled via a VCM volume/mute control module.
Rear Panel Features
1
2
3
4
5
| OFF ON | PHANTOM | 0.2A MAX | 12V | POWER |
|
|
|
|
|
|
|
| ||
|
|
| OUTPUT | LINE |
|
|
|
| OFF | LOW |
|
|
|
|
|
VOL/MUTE | ON 10V | CUT | REMOTE |
| PREAMPLIFIER | MIC TO LINE | MP 101 D |
Power input
a Power — Plug the external 12 VDC power supply into this captive screw connector. The power supply is included with the unit.
To verify the polarity before connection, plug in the power supply with no load and check the output with a voltmeter.
CWhen connecting the power supply, voltage polarity is extremely important. Applying power with incorrect voltage polarity could damage the power supply and the interface. Identify the power cord negative lead by the ridges on the side of the cord.
SmoothRidges
A | A |
SECTION
3/16" (5 mm) MAX
Power Supply
Output Cord
Captive Screw
Connector