Emerson Hot1 manual Connecting Water to Dispenser, Nut Ferrule

Page 8

4

CONNECTING WATER TO DISPENSER

A

Property Damage: Make sure the bends in tubing are smooth and not kinked. Don’t use paste-type sealants on water line connections. Tighten compression fittings snug but don’t over tighten.

■Bend and position the 1/4" copper line from the dispenser so it fits into the cold water supply. With one hand, support the copper line coming out of the tank and bend the tube with the other hand.

■Do not kink. Bend tube carefully.

B

Nut Ferrule

■When connecting to a compression type T-fitting or valve, remove the nut and ferrule (round brass piece) from the fitting. Then, place the nut followed by the ferrule over the end of the tube coming from the dispenser.

C

■Push the tube end all the way into the T-fitting or valve. Hold the tube end in position and push the ferrule down as far as it will go. Then, tighten the nut over the ferrule with your fingers. Make sure the tube end is going straight into the hole. Then tighten the nut firmly with a 1/2" wrench.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Instant Hot Water Dispenser What YOU should Know Before YOU Begin Water will be cold since tank has not been plugged in yet Dimensions Required minimum from center of hole to wall PreparationThat operates your disposer Installing the Dispenser Remove the spout by looseningSet screw in spout holder Approximately 2 full turnsWater Connection Options Compression valve or T-fitting option not suppliedSaddle valve option not supplied Shutoff valve option not suppliedConnecting Water to Dispenser Nut FerruleFill the Tank & Connect Power First, open the shutoff valve allWatertight. If there are any leaks Carefully re-tighten all connectionsWarranty Information Year WarrantyCare and USE Disconnect power From unitWarranty Troubleshooting Problem Possible Cause What to doManual del usuario Componentes EN Este Paquete Cómo Usar Este Manual DE Instrucciones Dimensiones Muchos propietarios reemplazan el PreparaciónMismo interruptor de pared que opera su surtidor Instalación DEL Surtidor Quite el tubo surtidor de aguaPorta-tubo surtidor Aproximadamente 2 vueltasOpciones DE Conexión DE Agua Conecte el tubo de cobre deConexión DE Agua AL Surtidor En primer lugar, abra por completo La válvula de cierre y observe si susConexiones son herméticas. Si hay Alguna fuga, vuelva a apretar conInformación DE LA Garantía Garantía de un añoLos limpiadores con ácidos, abrasivos Cuidado Y USODesconecte la energía de la unidad Solución DE Problemas Problema Causa Posible QUÉ HacerManuel du propriétaire Composants Dans CE Paquet Comment Utiliser CE Manuel D’INSTRUCTIONS Dimensions Préparation Installation DU Distributeur Options DE Raccord D’EAU Option à valve de compression ou raccord en T non fournisOption à robinet-vanne non fourni Option à robinet de sectionnement non fourniRaccorder L’EAU AU Distributeur Ouvrez d’abord le robinet de Regardez si vos raccords sontÉtanches. S’il y a des fuites Resserrez avec soin tous lesInformation SUR LA Garantie Garantie d’un anCoupez le courant à l’appareil Entretien ET UtilisationPour ajuster la Dépannage Problème Causes Possibles Quoi Faire

Hot1 specifications

The Emerson Hot1 is a cutting-edge thermal imaging solution that redefines the standards of temperature measurement in industrial applications. Tailored for maintenance teams and facility managers, it offers a comprehensive suite of features and technologies that enhance operational efficiency and safety.

One of the standout features of the Hot1 is its exceptional thermal sensitivity, which allows users to detect minor temperature variations. This sensitivity is critical for identifying potential problems in equipment before they escalate into costly failures. With a temperature measurement range of -20°C to 1200°C, the Hot1 is versatile enough to be used in various environments, from electrical inspections to mechanical systems.

The Emerson Hot1 incorporates advanced imaging technology, providing users with crisp, high-resolution thermal images. The integration of a robust, built-in camera enables users to capture both thermal and visual images simultaneously, allowing for detailed documentation and precise analysis. This dual-image capability is ideal for thorough reporting, ensuring that stakeholders are well-informed about the state of equipment.

One of the key technologies behind the Hot1 is its predictive maintenance capability. By continuously monitoring temperature data, the device enables users to implement a proactive maintenance strategy. This minimizes downtime and maximizes productivity by addressing issues before they become critical failures. Furthermore, the Hot1’s integrated data logging feature allows users to store and analyze historical temperature trends, offering insights into equipment performance over time.

User-friendly design is another hallmark of the Emerson Hot1. Its intuitive interface simplifies operation, making it accessible for both seasoned professionals and newcomers. The ergonomic design ensures comfort during extended use, and the lightweight construction enhances portability.

Additionally, the Hot1 is equipped with connectivity options, including Wi-Fi and Bluetooth, allowing for seamless integration with mobile devices and computers. Users can quickly upload images and data for remote analysis, further facilitating collaboration and decision-making.

In summary, the Emerson Hot1 thermal imaging device stands out for its combination of high sensitivity, advanced imaging technology, and predictive maintenance capabilities. Its user-centric design and connectivity options make it an invaluable tool for industries seeking to enhance their maintenance strategies, improve safety, and reduce operational costs. The Emerson Hot1 is a testament to innovation in thermal imaging, setting a new benchmark for reliability and performance.
Top Page Image Contents