Henny Penny OFE-321 manual Speaker Assembly, High Temperature, Checkout, Replacement

Page 10
2-11. SPEAKER ASSEMBLY

Model OFE-321,322

2-11. SPEAKER ASSEMBLY

The speaker assembly emits audible signals to let the operator know when cooking and hold times are finished.

1. Remove electrical power supplied to unit.

To avoid electrical shock or property damage, move the POWER switch to OFF and disconnect main circuit breaker, or unplug cord at wall receptacle.

2.Remove control panel.

3.Follow the speaker wire and disconnect from control board.

4.Remove the screws securing the speaker bracket to the shroud.

5.Remove the speaker from the bracket.

6.Reinstall in reverse order.

2-12. HIGH TEMPERATURE

LIMIT CONTROL The electric units, model OFE-321/2/3/4, use the same high temperature control limits as the gas units, OFG-321/2/3/4, but the mounting of the capillary tube is different on the electric units compared to the gas units.

Checkout:

Use the same procedure as in the High Limit Temperature Control (Gas) Section.

Replacement:

To avoid electrical shock or property damage, move the POWER switch to OFF and disconnect main circuit breaker, or unplug cord at wall receptacle, to the frypot to be worked on. Be aware the other controls will have power.

405

2-10

Image 10
Contents 2-3.COMPLETE CONTROL SECTION 2. MAINTENANCE2.Remove control panel 2-6.I/O POWER SUPPLY 2-7.DRAIN MICROSWITCH Continued 2-8.FILTER SWITCHCheckout Replacement2-9.HEATING ELEMENTS VoltageTemperature Spreader Probe 14. Replace the shortening in the frypot 2-10.HEATING CONTACTORS 3031 33 Checkout Power RemovedMercury Contactor CONTACTORS Checkout Power Supplied2-10.HEATING Continued2-11.SPEAKER ASSEMBLY 2-12.HIGH TEMPERATURECheckout 2-12.HIGH TEMPERATURE LIMIT CONTROL Continued 14.Replace front panel 15.Refill with shortening2-13 2-14