Hoshizaki C-100BAF-DS instruction manual Setup, Electrical Connection

Page 23

D.Setup

1)Position the icemaker in the selected permanent location.

2)Level the icemaker from side-to-side and front-to-rear by adjusting the feet.

E.Electrical Connection

WARNING

1.Electrical connection must meet national, state, and local electrical code requirements. Failure to meet these code requirements could result in death, electric shock, serious injury, fire, or severe damage to equipment.

2.This unit requires an independent power supply. See the nameplate for proper voltage and breaker/fuse size. Failure to use a proper breaker or fuse can result in a tripped breaker, blown fuse, or damage to existing wiring. This could lead to heat generation or fire.

3.THIS UNIT MUST BE GROUNDED: This unit is equipped with a 3-prong grounding plug to reduce the risk of potential shock hazards. It must be plugged into a properly grounded, independent wall outlet. If the outlet is a

2-prong outlet, it is your personal responsibility to have a qualified electrician replace it with a properly grounded, independent 3-prong wall outlet. Do not remove the ground prong from the power cord and do not use an adapter plug. Failure to follow these instructions may result in death, electric shock, or fire.

4.Do not use an extension cord.

5.Make sure the power switch is in the "OFF" position before plugging in or unplugging the unit to reduce the risk of electric shock.

6.Do not use a unit with a damaged power cord. The power cord should not be altered, jerked, bundled, weighed down, pinched, or tangled. Such actions could result in electric shock or fire. To unplug the unit, be sure to pull the plug, not the cord, and do not jerk the cord.

7.To reduce the risk of electric shock, do not touch the plug or power switch with damp hands.

8.The GREEN ground wire in the factory-installed power cord is connected to a screw on the gear motor base where the cord enters the unit. If it becomes necessary to remove or replace the power cord, be sure to connect the power cord's ground wire to this screw upon reattachment.

•Usually an electrical permit and services of a licensed electrician are required.

•The maximum allowable voltage variation is ±10 percent of the nameplate rating.

•For optional drain pump installation, refer to the instruction manual included with the pump.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents 100BAF-DS 100BAF-AD 100BAF-ADDS Hoshizaki AMERICA, INC Contents Unit Important Safety InformationSerious injury Indicates important information about the use and careSpecifications A. Construction Nameplate Rating Hoshizaki ICE Maker100BAF Dimensions/Connections100BAF-DS 100BAF-AD 100BAF-ADDS General II. Installation and Operating InstructionsChecks Before Installation LocationA Corner Built-In Installation SiteBetween a Cabinet and a Wall or Tall Cabinet Hinge Reversal Door100BAF, C-100BAF-AD Top Panel Screws Hinge B Notch Filler Parts 100BAF-DS, C-100BAF-ADDSOverlay Panel Fabrication and Attachment 100BAF-DS Overlay Panel Specification Overlay Panel Specification100BAF-ADDS Overlay Panel Specification Fabrication of Overlay Panel Screws Top Panel Notch Hinge B Filler BushingGasket Hinge Attachment of Overlay Panel to Door Bushing Gasket Electrical Connection SetupWater Supply and Drain Connections Final Checklist Startup Cleaning Procedure III. Cleaning and MaintenanceCleaning and Sanitizing Instructions Cleaning SolutionPacking Sanitizing Procedure Initial Sanitizing SolutionSanitizing Procedure Final Frequency Area Task MaintenanceCondenser Storage Bin DrainPreparing the Icemaker for Long Storage Hoshizaki AMERICA, INC

C-100BAF-DS, C-100BAF specifications

The Hoshizaki C-100BAF-DS and C-100BAF are two innovative ice makers designed for high efficiency and reliability, catering to the diverse needs of restaurants, bars, and various commercial settings. Known for their durability and advanced features, these models are exemplary in producing premium quality ice while maintaining operational efficiency.

One of the standout characteristics of both the C-100BAF-DS and C-100BAF is their ability to produce crescent ice, a desirable form valued for its aesthetic appeal and slow melting properties. This makes it ideal for drinks as it minimizes dilution, enhancing the drinking experience. The crescent ice also facilitates a consistent product presentation, making it a popular choice in the hospitality industry.

Equipped with advanced technologies, the Hoshizaki models utilize a patented ice-making process that ensures optimal production rates and ice quality. The C-100BAF-DS can produce up to 100 pounds of ice per day, making it suitable for busy environments without compromising on performance. Additionally, the C-100BAF features a built-in ice storage bin that can hold up to 80 pounds of ice, allowing for a continuous supply throughout peak service periods.

Both models are designed with energy efficiency in mind. They utilize a high-efficiency compressor along with a unique heat-exchange system that reduces energy consumption while maximizing output. This not only lowers operating costs but also supports environmentally friendly practices, making these machines a sustainable choice for businesses.

Another important feature is the ease of maintenance designed into these ice makers. Hoshizaki has implemented an efficient self-cleaning function that simplifies regular upkeep, ensuring hygienic ice production and minimizing the risk of contamination. Additionally, the machine's compact design allows for easy installation in limited spaces, making it versatile for various commercial layouts.

In conclusion, the Hoshizaki C-100BAF-DS and C-100BAF are exceptional ice-making machines that combine efficiency, quality, and user-friendly features. Their innovative technologies and characteristics make them indispensable for commercial operations looking to enhance their beverage services and cater to customer satisfaction.
Top Page Image Contents