Manitowoc Ice S1400M manual Installation Instructions Section Location of Ice Machine

Page 10

Installation Instructions

Section 2

 

 

Location of Ice Machine

The location selected for the ice machine must meet the following criteria. If any of these criteria are not met, select another location.

•The location must be free of airborne and other contaminants.

•The air temperature must be at least 35°F (1.6°C), but must not exceed 110°F (43.4°C).

•The location must not be near heat-generating equipment or in direct sunlight and must be protected from weather.

•The location must not obstruct air flow through or around the ice machine. Refer to the chart below for clearance requirements.

S1400M

Water-Cooled*

Top/Sides

8" (20.3 cm)

Back

5" (12.7 cm)

*There is no minimum clearance required for water-cooled or remote ice machines. This value is recommended for efficient operation and servicing only.

!Caution

The ice machine must be protected if it will be subjected to temperatures below 32°F (0°C). Failure caused by exposure to freezing temperatures is not covered by the warranty. See “Removal from Service/Winterization”.

Ice Machine Heat of Rejection

Series

Heat of Rejection

Ice Machine

Air Conditioning

Peak

S1400M

19000

28000

B.T.U./Hour

Because the heat of rejection varies during the ice making cycle, the figure shown is an average.

Ice machines, like other refrigeration equipment, reject heat through the condenser. It is helpful to know the amount of heat rejected by the ice machine when sizing air conditioning equipment where self-contained air- cooled ice machines are installed.

This information is also necessary when evaluating the benefits of using water-cooled or remote condensers to reduce air conditioning loads. The amount of heat added to an air conditioned environment by an ice machine using a water-cooled or remote condenser is negligible.

Knowing the amount of heat rejected is also important when sizing a cooling tower for a water-cooled condenser. Use the peak figure for sizing the cooling tower.

2-2

Part Number 80-1631-3

Page 9 Page 11
Image 10
Page 9 Page 11
Contents S1400M Model Ice Machines Installation Use and Care Manual Read These Before Proceeding Personal Injury PotentialTable of Contents Section Before Calling For Service Table of ContentsSection Maintenance Section Ice Machine OperationModel Numbers How to Read a Model NumberSection General Information Ice Cube SizesGeneral Information Section Accessories Section General Information Model/Serial Number Location Model/Serial Number LocationWarranty Coverage General Section Installation InstructionsIce Machine Dimensions S1400M WATER-COOLED ICE MachinesInstallation Instructions Section Location of Ice Machine Ice Machine Heat of RejectionMinimum Circuit Ampacity Section Installation Instructions Electrical ServiceVoltage Electrical RequirementsSelf Contained ICE Machine 208-230/3/60 For United Kingdom OnlySelf Contained ICE Machine 115/1/60 or 208-230/1/60 Self Contained ICE Machine 230/1/50Water Inlet Lines Cooling Tower ApplicationsWater Supply Drain ConnectionsTypical Water Supply Drain Installation Installation Instructions SectionWater Supply and Drain Line SIZING/CONNECTIONS Section Installation Instructions Installation Check List AuCS Automatic Cleaning System Potential Personal Injury SituationSection Ice Machine Operation Component IdentificationIce Machine Operation Section Sequence Of Operation Initial START-UP or START-UP After Automatic SHUT-OFFHarvest Safety TimersHarvest Sequence 5. Water Purge Automatic SHUT-OFF 7. Automatic Shut-OffICE Thickness Check Ice Machine Operation Section Operational ChecksWater Level Ice Thickness CheckWater Purge Adjustment Harvest Sequence Water PurgeIce Machine Operation Section Ice Machine Inspection Section MaintenanceExterior Cleaning Water-Cooled Condenser Water Regulating ValveSachet Replacement Frequency Maintenance Section GuardianInstallation Sachet Replacement ProcedureCleaning Procedure Section Maintenance Interior Cleaning and SanitizingStep Maintenance Section Sanitizing ProcedureRemoval of Parts for CLEANING/SANITIZING Water Curtain Removal Ice Thickness Probe Water CurtainIce Thickness Probe Removal Water Trough Water Distribution TubeWater Distribution Tube Removal Water Pump Water Level ProbeWater Pump Removal Dump Valve Disassembly Water Dump ValveEvaporator Tray Removal Drain Line Check ValveWater Inlet Valve Pry Open the Water Regulating Valve AUCS→ Accessory Maintenance Section Removal from Service/WinterizationSELF-CONTAINED WATER-COOLED ICE Machines Section Before Calling For Service ChecklistBefore Calling For Service Section Safety Limit FeaturePage Manitowoc ICE, INC

S1400M specifications

The Manitowoc Ice S1400M is a cutting-edge ice machine designed for high volume ice production, widely popular in the restaurant and hospitality industries. This model is part of Manitowoc’s acclaimed line of ice machines, known for their durability, efficiency, and innovative features that simplify ice making while enhancing operational performance.

One of the most notable features of the S1400M is its impressive production capacity. This unit is capable of producing up to 1,400 pounds of ice per day, making it a reliable choice for businesses with high ice demands. Whether it's for cocktails, beverages, or food preservation, the S1400M ensures that there is always enough ice available to meet customer needs.

The S1400M employs Manitowoc's advanced ice-making technology, which includes a state-of-the-art 100% stainless steel evaporator. This not only enhances the longevity of the unit but also helps produce cleaner and clearer ice. The unit utilizes a patented built-in actuator that completely purges the evaporator during the harvest cycle, ensuring that the ice is free from contaminants and undesirable residues.

Furthermore, the Manitowoc S1400M is designed with energy efficiency in mind. It operates with the Energy Star certification, which means it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This reduces operational costs and environmental impact, making the S1400M an excellent investment for eco-conscious businesses.

This model is also equipped with an intuitive ice thickness control system, allowing for customization of ice size according to specific needs. Users can easily set the machine to produce either half-cube or full-cube ice, catering to varying beverage requirements. Additionally, the S1400M features a user-friendly interface and digital display, providing operators with real-time machine status updates and alerts for maintenance or service needs.

Another important aspect of the S1400M is its flexible installation options. This unit can be paired with a variety of bins and dispensers, allowing businesses to optimize their space while ensuring the functionality of their ice supply. Its compact design is ideal for establishments with limited space, making it a versatile choice for bars, restaurants, and hotels.

In summary, the Manitowoc Ice S1400M represents the perfect blend of power, efficiency, and technological advancement. With its high production capacity, durable construction, customizable ice production, and energy-saving features, the S1400M stands out as a leading choice for any business requiring consistent and high-quality ice.
Top Page Image Contents