EF and EMF Series Warranty | Ice-O-Matic Series 250 through 2306

EF and EMF Series

Warranty

ICE-O-MATIC

Parts and Labor

Domestic & International Warranty

Mile High Equipment Company (the “Company”) warrants Ice-O-Matic brand ice machines, ice dispensers, remote condensers, and ice storage bins to the original user customer against defects in material and factory workmanship for a period of thirty-six(36) months on cube ice machines and twenty-four (24) months on flake ice machines, “compressed ice” ice machines, ice dispensers, remote condensers, and ice storage bins from the original date of installation on all parts. The Company will also pay straight time labor, based upon regional norms, to correct said defects for a period of thirty-six (36) months on cube ice machines and twenty- four (24) months on flake ice machines, “compressed ice” ice machines, ice dispensers, and ice storage bins. An additional twenty- four (24) month warranty on parts (excluding labor) will be extended to all cube ice and flake ice machine compressors and cube ice machine evaporator plates from the date of original installation. Ice/beverage dispensers will be warranted for twelve (12) months on parts only. The company will replace F.O.B the Company plant or, F.O.B the Company authorized distributor, without cost to the Customer, that part of any such machine that becomes defective. In the event that the Warranty Registration Card indicating the installation date has not been returned to the Company, it shall be assumed the unit was installed three (3) months after the date of shipment from the factory. Irrespective of the actual installation date, product will be warranted a maximum of seventy-two (72) months from date of shipment from the Company.

No replacement will be made for any part or assembly which (I) has been subject to an alteration or accident; (II) was used in any way which, in the Company’s opinion, adversely affects the performance; (III) is from a machine on which the serial number has been altered or removed; or, (IV) uses any replacement part not purchased from the company. This warranty does not apply to destruction or damage caused by unauthorized service, using other than Ice-O-Matic authorized replacements, risks of transportation, damage resulting from adverse environmental or water conditions, accidents, misuse, abuse, improper drainage, interruption in the electrical or water supply, charges related to the replacement of non-defective parts or components, damage by fire, flood, or acts of God. This warranty is valid only when installation, service, and preventive maintenance are performed by a Company-authorized distributor, a Company-authorized service agency, or a Company Regional Manager. The Company reserves the right to refuse claims made for ice machines or bins used in more than one location. Ice bills, normal maintenance, and cleaning are not covered.

Limitation of Implied Warranty

This warranty is valid only for products produced and shipped from the Company after September 30, 2002. A product produced or installed before that date shall be covered by the Limited Warranty in effect at the date of its shipment

The liability of the Company for breach of this warranty shall, in any case, be limited to the cost of a new part to replace any part which proves to be defective. The Company makes no representations or warranties of any character as to accessories or auxiliary equipment not manufactured by the Company.

REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE REMEDY OF THECUSTOMER. MILE HIGH EQUIPMENT SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIALDAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE EXTENTPROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FITNESS FOR APARTICULAR PURPOSE ON THIS PRODUC T IS LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY.

Filing a Claim

All claims for reimbursement must be received at the factory within 90 days from date of service to be eligible for credit. All claims outside this time period will be disallowed. The model, the serial number and, if necessary, proof of installation, must be included in the claim. Claims for labor to replace defective parts must be included with the part claim to receive consideration. Payment on claims for labor will be limited to the published labor time allowance hours in effect at the time of repair. The Company may elect to require the return of components to validate a claim. Any defective part returned must be shipped to the Company, transportation charges pre-paid, and properly sealed and tagged.

The Company does not assume any responsibility for any expenses incurred in the field incidental to the repair of equipment covered by this warranty. The decision of the Company with respect to repair or replacement of a part shall be final.

No person is authorized to give any other warranties or to assume any other liability on the Company’s behalf unless done in writing by an officer of the Company.

Mile High Equipment Company, 11100 East 45th Avenue, Denver, Colorado 80239 (303) 371-3737

September 30, 2002

Page iv

Series 250 through 2306 specifications

Ice-O-Matic's Series 250 to 2306 represents a significant advancement in ice-making technology, catering to a wide range of commercial applications. This series showcases a commitment to efficiency, reliability, and sustainability, making it a preferred choice for restaurants, bars, hotels, and various enterprises requiring consistent ice production.

One of the standout features of the Series 250 through 2306 is their high-capacity ice production. These machines are capable of producing a substantial quantity of ice daily, ensuring that businesses never run short during peak service times. With models producing anywhere from 100 to over 1,500 pounds of ice per day, operators can select the machine that best fits their specific needs.

The series employs advanced evaporator technology, resulting in excellent heat transfer and faster ice production cycles. This not only enhances the efficiency of the machines but also contributes to lower energy consumption, which is a crucial factor for businesses looking to reduce operational costs and environmental impact. Energy efficiency is further optimized with the inclusion of a patented water-efficient design, minimizing water waste and ensuring that each batch of ice is produced using the minimal amount of water necessary.

Another highlight of the Ice-O-Matic series is the incorporation of an innovative automated cleaning system. This feature simplifies maintenance, reduces manual labor, and enhances sanitation. By scheduling regular cleanings, operators can ensure a constant supply of high-quality ice, while minimizing the risk of contamination. This is particularly important in settings where hygiene is paramount.

The Series 250 to 2306 also boasts a compact footprint, making them suitable for a variety of commercial environments. Their designs are streamlined to fit into tight spaces without compromising on performance. Built with durability in mind, these machines utilize high-grade materials that stand up to the rigors of daily use, promising longevity and reliability.

Moreover, the machines in this series support a variety of ice types, such as cube and nugget ice, catering to diverse customer preferences. This adaptability makes them versatile companions in any food service establishment, optimizing ice usage for drinks, food preservation, and display needs.

In conclusion, Ice-O-Matic's Series 250 through 2306 embodies innovation in ice-making, with features like high-capacity production, energy efficiency, automated cleaning, and durable construction. These machines continue to set industry standards, offering unparalleled performance for businesses that rely on a steady supply of ice.