Manitowoc Ice QM45 Series service manual Section Ice Machine Operation, Component Identification

Page 17

Section 3 Ice Machine Operation

Component Identification

ICE THICKNESS PROBE

WATER DISTRIBUTION TUBE

EVAPORATOR

FLOAT VALVE ASSEMBLY

SIPHON CAP

BIN SWITCH MAGNET

ICE DAMPER

SV1731A

WATER PUMP

WATER TROUGH

CONDENSER AIR FILTER

ON/OFF/WASH

TOGGLE SWITCH

SV1733

COMPRESSOR COMPARTMENT

ACCESS SCREWS

3-1

Image 17

Contents QM45 Series Ice Machines Installation, Use, CareThis manual covers the following model numbers Safety NoticesProcedural Notices Table of Contents Checklist Safety Limit Feature Safety Limits MaintenanceBefore Calling for Service Section General Information AccessoriesSection General Information Model NumbersModel/Serial Number Location General Information SectionModel/Serial Number Location Commercial Warranty Coverage Owner Warranty Registration CardWHO is Covered by this Limited WARRANTY? Residential Warranty CoverageInstallation Instructions Section Installation InstructionsIce Machine Dimensions SectionIce Machine Heat of Rejection Installation Instructions SectionLocation of Ice Machine Leveling Leg and Foot Leveling the Ice MachineLeveling LEGChecking Ice Machine Level This page Intentionally Left Blank For United Kingdom Only Electrical ServiceVoltage QM-45 ICE Machine FUSE/CIRCUIT BreakerWater Supply Water Service/DrainsWater Inlet Lines Drain ConnectionsWater Supply and Drain Line SIZING/CONNECTIONS Typical Water Supply Drain InstallationPersonal Injury Potential Installation ChecklistBefore Starting the Ice Machine Component Identification Section Ice Machine OperationIce Machine Operation Initial START-UP or START-UP After Automatic SHUT-OFF Ice Machine Operation SectionIce Making Sequence of Operation QM45 SELF-CONTAINED AIR Cooled Models Siphon System Operational ChecksSiphon System Check Water Level CheckIce Thickness Check ICE Thickness CheckThis page Intentionally Left Blank Section Maintenance Section MaintenanceInterior Cleaning and Sanitizing Cleaning and Sanitizing ProcedureMaintenance Section Water Distribution Tube Disassembly DisassemblyRemove the Water Distribution Tube Water Distribution Tube RemovalRemove the Ice Damper InstallationRemove the Water Trough Remove the Bin Door Model Cleaning the Condenser Exterior CleaningICE Machine Inspection Air-Cooled CondenserSELF-CONTAINED AIR-COOLED ICE Machines Removal from Service WinterizationChecklist Section Before Calling for ServiceBefore Calling for Service Safety Limit Feature Before Calling for Service SectionSafety Limit Stand-By Mode Safety LimitsDetermining Which Safety Limit Stopped The Ice Machine Safety Limit NotesSafety Limit #2 Safety Limit #1Page Manitowoc ICE, INC