Manitowoc Ice QM45 Series Owner Warranty Registration Card, Commercial Warranty Coverage

Page 7

Section 1

General Information

Owner Warranty Registration Card

GENERAL

The packet containing this manual also includes warranty information. Warranty coverage begins the day your new ice machine is installed.

Important

Complete and mail the OWNER WARRANTY REGISTRATION CARD as soon as possible to validate the installation date.

If you do not return your OWNER WARRANTY REGISTRATION CARD, Manitowoc will use the date of sale to the Manitowoc Distributor as the first day of warranty coverage for your new ice machine.

Commercial Warranty Coverage

GENERAL

The following Warranty outline is provided for your convenience. For a detailed explanation, read the warranty bond shipped with each product.

Contact your local Manitowoc representative or Manitowoc Ice, Inc. if you need further warranty information.

PARTS

1.Manitowoc warrants the ice machine against defects in materials and workmanship, under normal use and service for three (3) years from the date of original installation.

LABOR

1.Labor required to repair or replace defective components is covered for three (3) years from the date of original installation.

EXCLUSIONS

The following items are not included in the ice machine’s warranty coverage:

1.Normal maintenance, adjustments and cleaning as outlined in this manual.

2.Repairs due to unauthorized modifications to the ice machine or use of non-standard parts without prior written approval from Manitowoc Ice, Inc.

3.Damage caused by improper installation of the ice machine, electrical supply, water supply or drainage, or damage caused by floods, storms, or other acts of God.

4.Premium labor rates due to holidays, overtime, etc.; travel time; flat rate service call charges; mileage and miscellaneous tools and material charges not listed on the payment schedule. Additional labor charges resulting from the inaccessibility of equipment are also excluded.

5.Parts or assemblies subjected to misuse, abuse, neglect or accidents.

6.Damage or problems caused by installation, cleaning and/or maintenance procedures inconsistent with the technical instructions provided in this manual.

AUTHORIZED WARRANTY SERVICE

To comply with the provisions of the warranty, a refrigeration service company qualified and authorized by your Manitowoc distributor, or a Contracted Service Representative must perform the warranty repair.

NOTE: If the dealer you purchased the ice machine from is not authorized to perform warranty service, contact your Manitowoc distributor or Manitowoc Ice, Inc. for the name of the nearest authorized service representative.

SERVICE CALLS

Normal maintenance, adjustments and cleaning as outlined in this manual are not covered by the warranty. If you have followed the procedures listed on page 5-1 of this manual, and the ice machine still does not perform properly, call your authorized service company.

1-3

Image 7
Contents QM45 Series Ice Machines Installation, Use, CareProcedural Notices Safety NoticesThis manual covers the following model numbers Table of Contents Before Calling for Service MaintenanceChecklist Safety Limit Feature Safety Limits Model Numbers AccessoriesSection General Information Section General InformationModel/Serial Number Location General Information SectionModel/Serial Number Location Commercial Warranty Coverage Owner Warranty Registration CardWHO is Covered by this Limited WARRANTY? Residential Warranty CoverageSection Section Installation InstructionsInstallation Instructions Ice Machine DimensionsLocation of Ice Machine Installation Instructions SectionIce Machine Heat of Rejection Leveling LEGChecking Ice Machine Level Leveling the Ice MachineLeveling Leg and Foot This page Intentionally Left Blank QM-45 ICE Machine FUSE/CIRCUIT Breaker Electrical ServiceFor United Kingdom Only VoltageDrain Connections Water Service/DrainsWater Supply Water Inlet LinesWater Supply and Drain Line SIZING/CONNECTIONS Typical Water Supply Drain InstallationBefore Starting the Ice Machine Installation ChecklistPersonal Injury Potential Ice Machine Operation Section Ice Machine OperationComponent Identification Ice Making Sequence of Operation Ice Machine Operation SectionInitial START-UP or START-UP After Automatic SHUT-OFF QM45 SELF-CONTAINED AIR Cooled Models Water Level Check Operational ChecksSiphon System Siphon System CheckIce Thickness Check ICE Thickness CheckThis page Intentionally Left Blank Cleaning and Sanitizing Procedure Section MaintenanceSection Maintenance Interior Cleaning and SanitizingMaintenance Section Water Distribution Tube Removal DisassemblyWater Distribution Tube Disassembly Remove the Water Distribution TubeRemove the Water Trough InstallationRemove the Ice Damper Remove the Bin Door Model Air-Cooled Condenser Exterior CleaningCleaning the Condenser ICE Machine InspectionSELF-CONTAINED AIR-COOLED ICE Machines Removal from Service WinterizationBefore Calling for Service Section Before Calling for ServiceChecklist Safety Limit Feature Before Calling for Service SectionSafety Limit Notes Safety LimitsSafety Limit Stand-By Mode Determining Which Safety Limit Stopped The Ice MachineSafety Limit #2 Safety Limit #1Page Manitowoc ICE, INC