Manitowoc Ice QM45 Series Section Installation Instructions, General, Ice Machine Dimensions

Page 9

Section 2

Installation Instructions

 

Section 2

 

Installation Instructions

General

These instructions are provided to assist the qualified installer. Check your local Yellow Pages for the name of the nearest Manitowoc distributor, or call Manitowoc Ice, Inc. for information regarding start- up services.

Important

Failure to follow these installation guidelines may affect warranty coverage.

Ice Machine Dimensions

QM-45 ICE MACHINES

6.00”

15.24 CM

22.34”

56.74 CM

19.69”

50.1 CM

SV1679B

 

 

 

 

3.35”

 

2.88”

8.6 CM

 

 

 

7.3 CM

3.85”

 

 

 

 

9.8 CM

 

6.19”

 

 

15.7 CM

5.94”

 

 

 

 

15.1 CM

 

3.75”

 

 

9.5 CM

SV1678E

 

 

 

ICE MAKING

 

 

WATER INLET

 

30”

 

 

76.2 CM

ICE MAKING

 

 

 

 

WATER/BIN DRAIN

 

 

 

ELECTRICAL

 

 

INLET

SV1735A

SV1733

2-1

Image 9
Contents QM45 Series Ice Machines Installation, Use, CareSafety Notices Procedural NoticesThis manual covers the following model numbers Table of Contents Maintenance Before Calling for ServiceChecklist Safety Limit Feature Safety Limits Section General Information AccessoriesSection General Information Model NumbersGeneral Information Section Model/Serial Number LocationModel/Serial Number Location Commercial Warranty Coverage Owner Warranty Registration CardWHO is Covered by this Limited WARRANTY? Residential Warranty CoverageInstallation Instructions Section Installation InstructionsIce Machine Dimensions SectionInstallation Instructions Section Location of Ice MachineIce Machine Heat of Rejection Leveling the Ice Machine Leveling LEGChecking Ice Machine LevelLeveling Leg and Foot This page Intentionally Left Blank For United Kingdom Only Electrical ServiceVoltage QM-45 ICE Machine FUSE/CIRCUIT BreakerWater Supply Water Service/DrainsWater Inlet Lines Drain ConnectionsWater Supply and Drain Line SIZING/CONNECTIONS Typical Water Supply Drain InstallationInstallation Checklist Before Starting the Ice MachinePersonal Injury Potential Section Ice Machine Operation Ice Machine OperationComponent Identification Ice Machine Operation Section Ice Making Sequence of OperationInitial START-UP or START-UP After Automatic SHUT-OFF QM45 SELF-CONTAINED AIR Cooled Models Siphon System Operational ChecksSiphon System Check Water Level CheckIce Thickness Check ICE Thickness CheckThis page Intentionally Left Blank Section Maintenance Section MaintenanceInterior Cleaning and Sanitizing Cleaning and Sanitizing ProcedureMaintenance Section Water Distribution Tube Disassembly DisassemblyRemove the Water Distribution Tube Water Distribution Tube RemovalInstallation Remove the Water TroughRemove the Ice Damper Remove the Bin Door Model Cleaning the Condenser Exterior CleaningICE Machine Inspection Air-Cooled CondenserSELF-CONTAINED AIR-COOLED ICE Machines Removal from Service WinterizationSection Before Calling for Service Before Calling for ServiceChecklist Safety Limit Feature Before Calling for Service SectionSafety Limit Stand-By Mode Safety LimitsDetermining Which Safety Limit Stopped The Ice Machine Safety Limit NotesSafety Limit #2 Safety Limit #1Page Manitowoc ICE, INC