Maintenance | Section 4 |
Step 12 Use 1/2 of the sanitizer/water solution to sanitize all foodzone surfaces of the ice machine and bin. Use a cloth or sponge to liberally apply the solution. When sanitizing, pay particular attention to the following areas:
•Evaporator plastic parts - including top, bottom and sides
•Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 13 Replace all removed components.
Step 14 Reapply power and water to the ice machine and place the toggle switch in the WASH position.
Step 15 Add the proper amount of Manitowoc Ice Machine Sanitizer to the water trough.
Model | Amount of Sanitizer |
QM45 | 1.5 ounces (45 ml) |
Step16 Wait until the sanitize cycle is complete (approximately 22 minutes) then place the toggle switch in the OFF position, disconnect power and water supplies to the ice machine.
WARNING
Disconnect electric power to the ice machine at the electric switch box before proceeding.
Step 17 Repeat step 6 to remove parts for hand sanitizing.
Step 18 Mix a solution of sanitizer and warm water.
Solution Type | Water | Mixed With |
Sanitizer | 6 gal. (23 l) | 4 oz (120 ml) sanitizer |
Step 19 Use 1/2 of the sanitizer/water solution to sanitize all removed components. Use a cloth or sponge to liberally apply the solution to all surfaces of the removed parts or soak the removed parts in the sanitizer/water solution. Do not rinse parts after sanitizing.
Step 20 Use 1/2 of the sanitizer/water solution to sanitize all foodzone surfaces of the ice machine and bin. Use a cloth or sponge to liberally apply the solution. When sanitizing, pay particular attention to the following areas:
•Evaporator plastic parts - including top, bottom and sides
•Bin bottom, sides and top
Do not rinse the sanitized areas.
Step 21 Replace all removed components.
Step 22 Reapply power and water to the ice machine and place the toggle switch in the ICE position.
.