Specifications of the Tempstar TGP

SPECIFICATIONS OF THE TEMPSTAR TGP

PERFORMANCE/CAPABILITIES		VOLTS	PHASE	AMPS
OPERATING CAPACITY (RACKS/HOUR)		208 - 240	1	6.7
RACKS PER HOUR	57
DISHES PER HOUR	1425	WATER REQUIREMENTS
GLASSES PER HOUR	1425	INLET TEMPERATURE		70 -140°F
		INLET TEMPERATURE		21.11-60°C
OPERATING CYCLE (SECONDS)		GALLONS PER HOUR		52.0
WASH TIME	45	LITERS PER HOUR		196.84
RINSE TIME	11	WATER LINE SIZE I.P.S. (Minimum)		3/4”
DWELL TIME	2	WATER LINE SIZE I.P.S. (Minimum)		1.9 CM
TOTAL CYCLE TIME	60	DRAIN LINE SIZE I.P.S. (Minimum)		1-1/2”
		DRAIN LINE SIZE I.P.S. (Minimum)		3.81 CM
TANK CAPACITY (GALLONS)		FLOW PRESSURE P.S.I. (Optimum)		20
WASH TANK (MINIMUM)	8.0
BOOSTER TANK	3.0	GAS REQUIREMENTS
		BTU INPUT RATE		55,000
TANK CAPACITY (LITERS)		INLET LINE PRESSURE (TOWN GAS)		4-6” wci
WASH TANK (MINIMUM)	30.28	MANIFOLD PRESSURE	(MINIMUM)	.25 wci
BOOSTER TANK	11.36		(MAXIMUM)	2.3 wci
WASH PUMP CAPACITY		FRAME DIMENSIONS
GALLONS PER MINUTE	150	WIDTH		25 3/4”
LITERS PER MINUTE	567.81	WIDTH		65.4 CM
		DEPTH		25 1/4”
TEMPERATURES		DEPTH		64.14 CM
WASH ---°F (MINIMUM)	150	HEIGHT		56 3/4”
WASH ---°C (MINIMUM)	65.56	HEIGHT		144.15 CM
RINSE ---°F	180	STANDARD TABLE HEIGHT		34”
RINSE ---°C	82.22	STANDARD TABLE HEIGHT		86.36 CM
		MAXIMUM INSIDE CLEARANCE		17 1/4”
ELECTRICAL REQUIREMENTS		MAXIMUM INSIDE CLEARANCE		43.82 CM
WASH PUMP MOTOR HP	3/4
CIRCULATOR PUMP MOTOR HP	1/12	RACKS
		DISH 20” X 20” (50.8 CM X 50.8 CM)		OPTIONAL
		GLASS & SILVER 20” X 20” (50.8 CM X 50.8 CM)		OPTIONAL