Everpure 325, 327 manual Spritz Drinks, Configure Pump Type, Set

Page 45
Page 39
August, 2003

Cold Drink Center (327/328) Operator’s Guide

Spritz Drinks

Spritz drinks are special versions of blended drinks that require a slightly different setup. The idea is to dispense a cold water drink with just a hint of flavoring. An example would be water with lemon. You can easily do this with a blended setup by doing the following:

1.Set up all times as you would with a water only drink.

2.

Set the

MIX.

and

 

screens to dispense from the same valve.

3.

Set the

MIX.X+

 

 

4.

 

 

PCT.

 

 

NOTE

 

Alter the syrup timer so that the total syrup throw is only a fraction of a

 

normal throw (1 or 2 seconds).

 

5.

An alternate technique is to set the first valve to the desired flavor, then set

 

percent plus to 100%. Either way, all the syrup comes from only one valve,

 

and the throw time can be adjusted to taste.

 

 

CONFIGURE PUMP TYPE

 

 

(Supervisor Mode Only)

 

1.

Press

 

 

 

, then

 

until the display shows one of the following:

 

 

 

 

 

- The machine is configured for CO2 pumps.

 

 

506

 

- The machine is configured for 50 Hz diaphragm pumps.

 

DIAPH.

HZ- The machine is configured for 60 Hz diaphragm pumps.

 

 

 

 

NOTE: Machines with diaphragm pumps can only vend one cup size.

2.

Press

 

 

 

to select the type of pumps in your machine.

If you select

GASPUMP

and press

, a decimal will display. This setting

 

 

 

 

 

 

 

 

puts the machine into mug only vending. If the machine will not drop cups,

 

 

 

ensure that this setting is not the source of the problem.

3.

CONTINUE.GASPUMP

 

 

 

 

3280020

Page 44 Page 46
Image 45
Page 44 Page 46
Contents Page Crane Merchandising Systems Parts and Support Table of Contents Factory Default Throw Times and Volumes View Diagnostic Messages Page Water Requirements Power RequirementsCountry Volts Frequency Hz Current Amps Water PressureSupply Line Requirements Final InstallationFlushing Water Supply Line Positioning The MerchandiserLoad the coin Mechanism Open the cab- inet doorMonetarySCREW door Install Options Everpure Water Filter Installation Hydrolife Filter Installation Bag-in-box machines Get The Machine Ready To Vend DrinksSyrup tank machines Load the cup mechanismObserve Proper Hygiene do not Touch the Cups Set up the CO2 tank Cold Drink Center 327/328 Operator’s Guide Handle as shown. Once BrixAdjustments and Minor Maintenance Refills Press Water pump starts, and the display showsLimit Screw see Warning Adjusting Screw Priming Switch Adjusting Screw Lock Set the Main Switch to the on up position Press Then Getting Around Programming The Cold Drink CenterDisplays Function KeysOther Keys Some Conventions Helpful HintControl Panel Switch Functions Explained Message if desired see Edit Custom Message on SureVendOr after being downloaded into a Supervisor Mode Only Gain Access to the Supervisor ModeFollow the steps in Gain Access To The Supervisor Mode on Enter a NEW Supervisor CodeEnter a NEW Data Recall Code UsageExamples Press SET Printer or DEX Mode SET Talker ModeTo turn the talker option on or OFF Consult your DEX supplier before choosing this optionSET DEX Options Printer mode onlyMechanism choice Select Display LanguageList of bills. See Initial Setup Of NonStandard Bill Valida Select Bill Validator and OptionsTor on Options on page 28 , to select Initial Setup of Nonstandard Bill ValidatorSelect Monetary Options Select Card Reader and OptionsSome examples Example If setting isExample SET UP Winner Mode Disable Selections in the Merchandiser SET UP MUG DiscountThis display means that all regular size selections a F are Selections. PressDisplay momentarily shows SET UP CUP SizesThis will reassign This will reload the facAppear View and change the settings for syrup SET UP a DrinkView and change the settings for ice throw time For the selection PressingCup Size Volume Time Sec Factory Default Throw Times and VolumesSpecial Selections Syrup Throw Still and Carb Ice Extra IceSelect Blended DrinksTo use. For example, set percentage plus to This means Press Until something like Displays. PressSpritz Drinks Configure Pump TypeSet Press To select the type of pumps in your machineSET UP Automatic Delivery Door Options Configure Number of SelectionsAbcdef Assign CUP Sizes to Selections Supervisor Mode OnlyOptional or Mandatory Surevend Turn Surevend on or OFFView Software Version SET UP the Surevend ANTI-JACKPOT TimerReceives change Xxxxxx represents the current software version numberSET the Time of DAY SET MONTH, DATE, and YearSET Daylight Savings Time Options SET TIME-OF-DAY Inhibit Vending SET TIME-OF-DAY Free VendingSET TIME-OF-DAY Discount Vending Press the number of the time interval you Time Interval EditingThis display tells you whether XX is the currently set startNow shows Stop press X.XX===Select a Standby Message Select AN OUT-OF-SERVICE MessageMachine Press Then press Display the factory-set message, pressCharacter is displayed Select a Freevend MessageEnd Of Message Character ShortcutSetting Press View Machine Configuration SettingAutomatic vend door Drink 0. Press To view the rest of the available selectionsPayout Coins View CUP Sizes Assigned to SelectionsPress Then press Until the display shows something like Press To view the rest of the available selectionsView Nonresettable Sales and Vend Data SET PricesPress Display shows XX.XX is a dollar and cents View Total Paid Sales View Data Four Different WaysView Total Sales by Drink Size View Total Sales by Selection Both CUP SizesView Total Sales by Individual Selection View Total Paid Sales by Price LineTo view the total sales of each large cup selection Clear ALL Resettable Data Clear Paid Sales Data onlyView Amount in Coin BOX Not Shown if Zero View Amount in Validator Not Shown If ZeroView Freevend Sales by Time Interval View Discount Sales by Time Interval View Free Vends Not Shown If ZeroView Winners Not Shown If Zero View Time Data View Total Unpaid Vends View Total Unpaid SalesAt 942 am 1100 amGain Access To The Supervisor Mode on View Number of Test VendsView Machine ID Number Cycled. Check the cup ring adjustment see Cup mechanism View Home Switch USE Related to SurevendView CUP Ring Cycles Related to Surevend View Number of CUP Ring Cycle FailuresTest Vend Selections and Verify Credit Added Vend modeTest the Display Display shows You may now test vendTest the Automatic Delivery Door Test Drop a CUPTest Throw Still Water Test Throw Carbonated WaterTest the ICE Maker Test the Syrup PumpsTest the Carbonator Fill during the Coolsan process Pail and dump its contents. The display will showRead With the time message transposed At thisTest Various Switches and Sensors Input Screen 1 DefinitionsInput Screen 2 Definitions Press , then press until the display shows View Surevend Average Calibration ValueDisplay shows FINISHED. Reconfigure the merchandiser View Diagnostic MessagesSettings price, time, monetary options, messages, etc Then press Until the display showsRect config number directly on this screen without further Keyswitch input is active and configured as an inhibitPower OFF and then on Error is corrected. Check for bill stuck in the acceptanceDownload Data to a Pdcd SET Freevend Options Cold Drink Center 327/328 Operator’s Guide Index Page Polarity Check Supervisor Total Sales by Selection View Terms and Conditions of Sale

325, 327 specifications

Everpure is known for its commitment to providing high-quality water filtration solutions, and their 327 and 325 series are prime examples of this dedication. Designed primarily for commercial use, these models are crafted to enhance the flavor of beverages and ensure safe, crystal-clear drinking water.

The Everpure 327 is engineered specifically for applications like espresso machines, commercial coffee brewing, and other foodservice needs. It minimizes scale buildup and helps prevent corrosion, preserving the integrity and efficiency of expensive equipment. The filter uses a unique blend of activated carbon and a proprietary ion-exchange resin, which effectively reduces contaminants such as chlorine, sediment, and particulate matter. This not only enhances taste but also contributes to a cleaner and longer-lasting appliance.

Meanwhile, the Everpure 325 serves as a trusted solution for foodservice operations that require high-quality filtered water. Featuring similar filtration technologies, it prioritizes the removal of undesirable tastes and odors while also tackling unwanted chemicals such as cysts and lead. The 325 model is versatile and can handle a variety of applications, making it ideal for establishments such as restaurants, cafes, and bars.

One standout feature of both models is their exclusive Micro-Pure technology. This technology works to inhibit the growth of bacteria and other microorganisms within the filter, promoting a healthier environment and reducing the risk of contamination. Additionally, the filters are designed for easy installation and maintenance, providing a user-friendly experience for operators.

Both the Everpure 327 and 325 are built with a focus on durability and reliability. They come with a long-lasting filter life, which minimizes the need for frequent replacements, thus saving on operational costs. Their capacity to provide consistent water quality means operators can focus more on serving their customers rather than worrying about water quality issues.

In summary, the Everpure 327 and 325 series stand out for their advanced filtration technology, which effectively improves taste and quality while ensuring equipment longevity. With features aimed at optimizing performance and safety, these models are indispensable for any commercial kitchen or foodservice operation looking to provide the best to its customers.
Top Page Image Contents