Everpure 327, 325 manual View Diagnostic Messages, Then press Until the display shows

Page 76
August, 2003

Cold Drink Center (327/328) Operator’s Guide

TEST THE DISPLAY

1.

Press

, then press

until the display shows

.

2.

Press

to light all display segments; press

to turn them off.

3.

Pressing a NUMBER KEY on the control panel causes all segments to

 

display that character.

 

 

 

 

4.

Pressing a key on the maintenance keypad causes all segments to display

 

that character (found in the upper left hand corner of the key). Please note

 

that the character is displayed along with a leading apostrophe to indicate

 

that the maintenance keypad is being tested.

 

 

 

5.

CONTINUE.

 

 

 

 

 

 

VIEW DIAGNOSTIC MESSAGES

 

 

1.

Press

. The display shows any of the following diagnostic

 

 

messages, depending upon any fault(s) present:

DSPLYTEST

 

 

None of the following errors are detected:

 

 

Key(s) x, y stuck.

 

 

 

 

Error in the programming EPROM. Machine will not operate.

RM

 

One or more of the configuration settings may be incorrect.

NO

XY

Check the machine settings (time of day, cup size, pricing,

etc).

 

 

 

 

1. If the problem is corrected, the RAM ERROR message

can be cleared by pressing

once.

 

NOTE: If the source of the error is not resolved,

will

clear the error code, but will not resolve the problem.

 

2. If you cannot find the problem, you can initialize your

RAM by performing the following procedure:

 

Press AND HOLD

until two beeps sound and the

display shows FINISHED. Reconfigure the merchandiser.

IMPORTANT NOTE: Initializing RAM will erase all data and

settings (price, time, monetary options, messages, etc).

Record this information and be ready to reprogram the

 

 

machine from factory default settings before continuing.

KEYPADERRORS

 

 

 

 

 

Page 70

3280020

Page 75 Page 77
Image 76
Page 75 Page 77
Contents Page Crane Merchandising Systems Parts and Support Table of Contents Factory Default Throw Times and Volumes View Diagnostic Messages Page Power Requirements Water RequirementsCountry Volts Frequency Hz Current Amps Water PressureFinal Installation Supply Line RequirementsFlushing Water Supply Line Positioning The MerchandiserMechanism Open the cab- inet door Load the coinMonetarySCREW door Install Options Everpure Water Filter Installation Hydrolife Filter Installation Get The Machine Ready To Vend Drinks Bag-in-box machinesSyrup tank machines Load the cup mechanismObserve Proper Hygiene do not Touch the Cups Set up the CO2 tank Cold Drink Center 327/328 Operator’s Guide Brix Handle as shown. OnceAdjustments and Minor Maintenance Press Water pump starts, and the display shows RefillsLimit Screw see Warning Adjusting Screw Priming Switch Adjusting Screw Lock Set the Main Switch to the on up position Press Then Programming The Cold Drink Center Getting AroundFunction Keys DisplaysOther Keys Helpful Hint Some ConventionsControl Panel Switch Functions Explained SureVend Message if desired see Edit Custom Message onOr after being downloaded into a Gain Access to the Supervisor Mode Supervisor Mode OnlyFollow the steps in Gain Access To The Supervisor Mode on Enter a NEW Supervisor CodeUsage Enter a NEW Data Recall CodeExamples Press SET Talker Mode SET Printer or DEX ModeTo turn the talker option on or OFF Consult your DEX supplier before choosing this optionPrinter mode only SET DEX OptionsSelect Display Language Mechanism choiceSelect Bill Validator and Options List of bills. See Initial Setup Of NonStandard Bill ValidaTor on Initial Setup of Nonstandard Bill Validator Options on page 28 , to selectSelect Card Reader and Options Select Monetary OptionsExample If setting is Some examplesExample SET UP Winner Mode SET UP MUG Discount Disable Selections in the MerchandiserThis display means that all regular size selections a F are Selections. PressSET UP CUP Sizes Display momentarily showsThis will reassign This will reload the facSET UP a Drink Appear View and change the settings for syrupView and change the settings for ice throw time For the selection PressingFactory Default Throw Times and Volumes Cup Size Volume Time SecSpecial Selections Syrup Throw Still and Carb Ice Extra IceBlended Drinks SelectTo use. For example, set percentage plus to This means Press Until something like Displays. PressConfigure Pump Type Spritz DrinksSet Press To select the type of pumps in your machineConfigure Number of Selections SET UP Automatic Delivery Door OptionsAssign CUP Sizes to Selections Supervisor Mode Only AbcdefTurn Surevend on or OFF Optional or Mandatory SurevendSET UP the Surevend ANTI-JACKPOT Timer View Software VersionReceives change Xxxxxx represents the current software version numberSET MONTH, DATE, and Year SET the Time of DAYSET Daylight Savings Time Options SET TIME-OF-DAY Free Vending SET TIME-OF-DAY Inhibit VendingSET TIME-OF-DAY Discount Vending Time Interval Editing Press the number of the time interval youThis display tells you whether XX is the currently set startStop press X.XX=== Now showsSelect AN OUT-OF-SERVICE Message Select a Standby MessageMachine Press Then press Display the factory-set message, pressSelect a Freevend Message Character is displayedShortcut End Of Message CharacterView Machine Configuration Setting Setting PressAutomatic vend door Drink 0. Press To view the rest of the available selectionsView CUP Sizes Assigned to Selections Payout CoinsPress Then press Until the display shows something like Press To view the rest of the available selectionsSET Prices View Nonresettable Sales and Vend DataPress Display shows XX.XX is a dollar and cents View Data Four Different Ways View Total Paid SalesView Total Sales by Drink Size View Total Sales by Selection Both CUP SizesView Total Paid Sales by Price Line View Total Sales by Individual SelectionTo view the total sales of each large cup selection Clear Paid Sales Data only Clear ALL Resettable DataView Amount in Coin BOX Not Shown if Zero Not Shown If Zero View Amount in ValidatorView Freevend Sales by Time Interval View Free Vends Not Shown If Zero View Discount Sales by Time IntervalView Winners Not Shown If Zero View Time Data View Total Unpaid Sales View Total Unpaid VendsAt 942 am 1100 amView Number of Test Vends Gain Access To The Supervisor Mode onView Machine ID Number View Home Switch USE Related to Surevend Cycled. Check the cup ring adjustment see Cup mechanismView CUP Ring Cycles Related to Surevend View Number of CUP Ring Cycle FailuresVend mode Test Vend Selections and Verify Credit AddedTest the Display Display shows You may now test vendTest Drop a CUP Test the Automatic Delivery DoorTest Throw Still Water Test Throw Carbonated WaterTest the Syrup Pumps Test the ICE MakerTest the Carbonator Pail and dump its contents. The display will show Fill during the Coolsan processRead With the time message transposed At thisInput Screen 1 Definitions Test Various Switches and SensorsInput Screen 2 Definitions View Surevend Average Calibration Value Press , then press until the display showsView Diagnostic Messages Display shows FINISHED. Reconfigure the merchandiserSettings price, time, monetary options, messages, etc Then press Until the display showsKeyswitch input is active and configured as an inhibit Rect config number directly on this screen without furtherPower OFF and then on Error is corrected. Check for bill stuck in the acceptanceDownload Data to a Pdcd SET Freevend Options Cold Drink Center 327/328 Operator’s Guide Index Page Polarity Check Supervisor Total Sales by Selection View Terms and Conditions of Sale

325, 327 specifications

Everpure is known for its commitment to providing high-quality water filtration solutions, and their 327 and 325 series are prime examples of this dedication. Designed primarily for commercial use, these models are crafted to enhance the flavor of beverages and ensure safe, crystal-clear drinking water.

The Everpure 327 is engineered specifically for applications like espresso machines, commercial coffee brewing, and other foodservice needs. It minimizes scale buildup and helps prevent corrosion, preserving the integrity and efficiency of expensive equipment. The filter uses a unique blend of activated carbon and a proprietary ion-exchange resin, which effectively reduces contaminants such as chlorine, sediment, and particulate matter. This not only enhances taste but also contributes to a cleaner and longer-lasting appliance.

Meanwhile, the Everpure 325 serves as a trusted solution for foodservice operations that require high-quality filtered water. Featuring similar filtration technologies, it prioritizes the removal of undesirable tastes and odors while also tackling unwanted chemicals such as cysts and lead. The 325 model is versatile and can handle a variety of applications, making it ideal for establishments such as restaurants, cafes, and bars.

One standout feature of both models is their exclusive Micro-Pure technology. This technology works to inhibit the growth of bacteria and other microorganisms within the filter, promoting a healthier environment and reducing the risk of contamination. Additionally, the filters are designed for easy installation and maintenance, providing a user-friendly experience for operators.

Both the Everpure 327 and 325 are built with a focus on durability and reliability. They come with a long-lasting filter life, which minimizes the need for frequent replacements, thus saving on operational costs. Their capacity to provide consistent water quality means operators can focus more on serving their customers rather than worrying about water quality issues.

In summary, the Everpure 327 and 325 series stand out for their advanced filtration technology, which effectively improves taste and quality while ensuring equipment longevity. With features aimed at optimizing performance and safety, these models are indispensable for any commercial kitchen or foodservice operation looking to provide the best to its customers.
Top Page Image Contents