Everpure 327 Select a Standby Message, Select AN OUT-OF-SERVICE Message, Machine Press Then press

Page 54
August, 2003

Cold Drink Center (327/328) Operator’s Guide

SELECT A STANDBY MESSAGE

STANDBY

The message that displays during normal vending periods when there are no out-of-service faults on

MESSAGE

the machine.

1.

Press

, then press

until the display shows

.

 

"XX" represents the current message number selected for the standby

 

message. Two dashes mean that the factory-set message is selected.

2.

To select a message, just press the corresponding number (1 through 8). To

 

display the factory-set message, press 0.

 

3.

The selected message (except the factory-set message) can be edited. To

 

do this, press

and follow the procedure given in "Edit Custom Message"

 

on page 49.

 

 

 

4.

CONTINUE.

 

 

 

 

SELECT AN OUT-OF-SERVICE MESSAGE

1.

Press

, then press

until the display shows

.

 

"XX" represents the current message number selected to display when the

 

machine is out-of-service. Two dashes mean that the factory-set message

 

is selected.

 

 

 

2.

To select a message, just press the corresponding number (1 through 8). To

 

display the factory-set message, press 0.

STANDBYXX

 

 

3.

The selected message (except the factory-set message) can be edited. To

 

do this, press

and follow the procedure given in "Edit Custom Message"

 

on page 49.

 

 

SERVICEXX

4.

CONTINUE.

 

 

Page 48

3280020

Page 53 Page 55
Image 54
Page 53 Page 55
Contents Page Crane Merchandising Systems Parts and Support Table of Contents Factory Default Throw Times and Volumes View Diagnostic Messages Page Country Volts Frequency Hz Current Amps Power RequirementsWater Requirements Water PressureFlushing Water Supply Line Final InstallationSupply Line Requirements Positioning The MerchandiserLoad the coin Mechanism Open the cab- inet doorMonetarySCREW door Install Options Everpure Water Filter Installation Hydrolife Filter Installation Syrup tank machines Get The Machine Ready To Vend DrinksBag-in-box machines Load the cup mechanismObserve Proper Hygiene do not Touch the Cups Set up the CO2 tank Cold Drink Center 327/328 Operator’s Guide Brix Handle as shown. OnceAdjustments and Minor Maintenance Press Water pump starts, and the display shows RefillsLimit Screw see Warning Adjusting Screw Priming Switch Adjusting Screw Lock Set the Main Switch to the on up position Press Then Programming The Cold Drink Center Getting AroundDisplays Function KeysOther Keys Helpful Hint Some ConventionsControl Panel Switch Functions Explained SureVend Message if desired see Edit Custom Message onOr after being downloaded into a Follow the steps in Gain Access To The Supervisor Mode on Gain Access to the Supervisor ModeSupervisor Mode Only Enter a NEW Supervisor CodeEnter a NEW Data Recall Code UsageExamples Press To turn the talker option on or OFF SET Talker ModeSET Printer or DEX Mode Consult your DEX supplier before choosing this optionPrinter mode only SET DEX OptionsSelect Display Language Mechanism choiceList of bills. See Initial Setup Of NonStandard Bill Valida Select Bill Validator and OptionsTor on Initial Setup of Nonstandard Bill Validator Options on page 28 , to selectSelect Card Reader and Options Select Monetary OptionsExample If setting is Some examplesExample SET UP Winner Mode This display means that all regular size selections a F are SET UP MUG DiscountDisable Selections in the Merchandiser Selections. PressThis will reassign SET UP CUP SizesDisplay momentarily shows This will reload the facView and change the settings for ice throw time SET UP a DrinkAppear View and change the settings for syrup For the selection PressingSpecial Selections Factory Default Throw Times and VolumesCup Size Volume Time Sec Syrup Throw Still and Carb Ice Extra IceTo use. For example, set percentage plus to This means Blended DrinksSelect Press Until something like Displays. PressSet Configure Pump TypeSpritz Drinks Press To select the type of pumps in your machineConfigure Number of Selections SET UP Automatic Delivery Door OptionsAssign CUP Sizes to Selections Supervisor Mode Only AbcdefTurn Surevend on or OFF Optional or Mandatory SurevendReceives change SET UP the Surevend ANTI-JACKPOT TimerView Software Version Xxxxxx represents the current software version numberSET the Time of DAY SET MONTH, DATE, and YearSET Daylight Savings Time Options SET TIME-OF-DAY Inhibit Vending SET TIME-OF-DAY Free VendingSET TIME-OF-DAY Discount Vending This display tells you whether Time Interval EditingPress the number of the time interval you XX is the currently set startStop press X.XX=== Now showsMachine Press Then press Select AN OUT-OF-SERVICE MessageSelect a Standby Message Display the factory-set message, pressSelect a Freevend Message Character is displayedShortcut End Of Message CharacterAutomatic vend door View Machine Configuration SettingSetting Press Drink 0. Press To view the rest of the available selectionsPress Then press Until the display shows something like View CUP Sizes Assigned to SelectionsPayout Coins Press To view the rest of the available selectionsView Nonresettable Sales and Vend Data SET PricesPress Display shows XX.XX is a dollar and cents View Total Sales by Drink Size View Data Four Different WaysView Total Paid Sales View Total Sales by Selection Both CUP SizesView Total Sales by Individual Selection View Total Paid Sales by Price LineTo view the total sales of each large cup selection Clear ALL Resettable Data Clear Paid Sales Data onlyView Amount in Coin BOX Not Shown if Zero View Amount in Validator Not Shown If ZeroView Freevend Sales by Time Interval View Discount Sales by Time Interval View Free Vends Not Shown If ZeroView Winners Not Shown If Zero View Time Data At 942 am View Total Unpaid SalesView Total Unpaid Vends 1100 amGain Access To The Supervisor Mode on View Number of Test VendsView Machine ID Number View CUP Ring Cycles Related to Surevend View Home Switch USE Related to SurevendCycled. Check the cup ring adjustment see Cup mechanism View Number of CUP Ring Cycle FailuresTest the Display Vend modeTest Vend Selections and Verify Credit Added Display shows You may now test vendTest Throw Still Water Test Drop a CUPTest the Automatic Delivery Door Test Throw Carbonated WaterTest the Syrup Pumps Test the ICE MakerTest the Carbonator Read With the time message transposed Pail and dump its contents. The display will showFill during the Coolsan process At thisTest Various Switches and Sensors Input Screen 1 DefinitionsInput Screen 2 Definitions View Surevend Average Calibration Value Press , then press until the display showsSettings price, time, monetary options, messages, etc View Diagnostic MessagesDisplay shows FINISHED. Reconfigure the merchandiser Then press Until the display showsPower OFF and then on Keyswitch input is active and configured as an inhibitRect config number directly on this screen without further Error is corrected. Check for bill stuck in the acceptanceDownload Data to a Pdcd SET Freevend Options Cold Drink Center 327/328 Operator’s Guide Index Page Polarity Check Supervisor Total Sales by Selection View Terms and Conditions of Sale

325, 327 specifications

Everpure is known for its commitment to providing high-quality water filtration solutions, and their 327 and 325 series are prime examples of this dedication. Designed primarily for commercial use, these models are crafted to enhance the flavor of beverages and ensure safe, crystal-clear drinking water.

The Everpure 327 is engineered specifically for applications like espresso machines, commercial coffee brewing, and other foodservice needs. It minimizes scale buildup and helps prevent corrosion, preserving the integrity and efficiency of expensive equipment. The filter uses a unique blend of activated carbon and a proprietary ion-exchange resin, which effectively reduces contaminants such as chlorine, sediment, and particulate matter. This not only enhances taste but also contributes to a cleaner and longer-lasting appliance.

Meanwhile, the Everpure 325 serves as a trusted solution for foodservice operations that require high-quality filtered water. Featuring similar filtration technologies, it prioritizes the removal of undesirable tastes and odors while also tackling unwanted chemicals such as cysts and lead. The 325 model is versatile and can handle a variety of applications, making it ideal for establishments such as restaurants, cafes, and bars.

One standout feature of both models is their exclusive Micro-Pure technology. This technology works to inhibit the growth of bacteria and other microorganisms within the filter, promoting a healthier environment and reducing the risk of contamination. Additionally, the filters are designed for easy installation and maintenance, providing a user-friendly experience for operators.

Both the Everpure 327 and 325 are built with a focus on durability and reliability. They come with a long-lasting filter life, which minimizes the need for frequent replacements, thus saving on operational costs. Their capacity to provide consistent water quality means operators can focus more on serving their customers rather than worrying about water quality issues.

In summary, the Everpure 327 and 325 series stand out for their advanced filtration technology, which effectively improves taste and quality while ensuring equipment longevity. With features aimed at optimizing performance and safety, these models are indispensable for any commercial kitchen or foodservice operation looking to provide the best to its customers.
Top Page Image Contents