Everpure 325, 327 manual Select a Freevend Message, Character is displayed

. Press

until the display shows

1. Press

, then press

on page 49

4. CONTINUE.

EDIT CUSTOM MESSAGE

Cold Drink Center (327/328) Operator’s Guide

SELECT A FREEVEND MESSAGE

1.	Press	, then press	until the display shows	.
			NOTE	FREEVXX
	"XX" represents the current message number selected for the message that
	displays when the machine is in freevend mode. Two dashes indicate that
	the factory-set message is selected.
2.	To select a message, just press the corresponding number (1 through 8). To
	display the factory-set message, press 0.
3.	The selected message (except the factory-set message) can be edited. To
	do this, press	and follow the procedure given in "Edit Custom Message"

	the number of the message you want to edit.						is displayed (X
	represents the message number you pressed).
		Custom message 8 represents the				Gmessage.
	character set.					INSERT=MESSAEMU	X
2.	Press		. The message text is displayed with the first character
	flashing.
3.	To view the message, press				. The message scrolls across the
	display. To stop the scrolling, press					.
4.	When the character you want to change is flashing, either enter it directly, or
	use		and	to step through the character set until the desired
	character is displayed.			Use the arrow keys to highlight differentEDITMSG'Scharacters.

See the section on the next page for an explanation of special keys and the

3280020 Page 49 August, 2003