Miele DAG 500 Operation, Raising the vent / Turning on the fan, Selecting the power level

Page 10

Operation

Raising the vent / Turning on the fan

￿Press the On/Off button on the top of the ventilation system.

The vent will rise.

The fan will start at power level 2.

The fan will automatically turn off if it is blocked while rising or retracting.

When the obstruction is removed, press the On/Off button on the top of the appliance to restart it.

Selecting the power level

￿Use buttons 1 to 4 to select the desired power level.

Typically, levels 1 to 3 are sufficient for regular cooking needs.

Intensive level

￿To remove intensive vapors or odors, such as when pan-frying, select power level 4.

Delayed shut-off feature ￿15

We recommend that you let the fan run for several minutes after you have finished cooking.

This will help remove any remaining vapors or odors from the kitchen.

The Delayed shut down feature lets you set the fan to shut off automatically after 15 minutes.

￿With the fan on press the Delayed shut down button ￿15.

The fan will turn off in 15 minutes. The vent will remain up.

￿To lower the vent, press the On/Off button on the top of the appliance.

Turning the fan off / Lowering the vent

￿Press the On/Off button on the top of the appliance.

The fan turns off.

The vent retracts.

￿If you wish to turn off the fan but leave the vent up for cleaning, press and hold the 0/1 button until the fan turns off.

￿To turn the fan back on, press the 0/1 button again.

10

Image 10
Contents En US, CA Contents Important Safety Instructions Use To Reduce the Risk of a Cooktop Grease FireEvacuate and Call the Fire Department Installation With the internal DAG 500 exhaust blower Not included Functional description With the DAG 1000 external blower Not included Description of the appliance Delayed shut down feature Temperature warning light Power level settingsVent collar Operation Selecting the power levelDelayed shut-off feature Raising the vent / Turning on the fanTemperature warning § Cleaning the casing Cleaning and CareStainless steel Grease filters Special instructions for control buttonsCleaning the grease filters After Sales Service RepairsPage Installation Instructions Page Disposal of packing material Caring for the environmentDisposal of an old appliance Appliance dimensions Exhaust duct connection diameters Cabinet dimensions Appliance dimensions Installation using the DAG 500 internal blower Appliance dimensions Installation Installation preparationInstallation Installing the DAG 500 blower box on the front Venting direction towards the rear Mount the vent collar on the rear Installing the DAG 500 blower box on the rear Preparing the electrical connection Installation Installation with the DAG 1000 external blower Air extraction Condensate trap Only for Canada with the DAG 500 Internal blowerElectrical connection This Appliance Must be GroundedElectrical connection if using an external blower Page Alteration rights reserved Nr 045 140
Related manuals
Manual 16 pages 25.65 Kb Manual 40 pages 52.78 Kb