Miele DAG 500, DA 6490, DA 6480, DAG 1000 installation instructions Cleaning the grease filters

Page 14

Cleaning and Care

Cleaning the grease filters

￿By hand: use a scrub brush with a solution of warm water and mild dish soap.

Do not use the pure detergent, aggressive all purpose cleaners, oven sprays, abrasive cleaning agents or limescale removers. They could damage the filter.

￿In a dishwasher: place the filter vertically in the lower basket, making sure that the spray arm is not blocked.

Use a hot temperature program, e.g. "Heavy Soil" or "Pots and pans". Use the recommended amount of dishwasher detergent. Overuse of detergent could damage the filter.

Depending on the detergent, cleaning the grease filters in a dishwasher may cause permanent discoloration of the filter surface. Filter performance will not be affected by this discoloration.

￿After cleaning, place the filters on a towel to air dry.

￿While the filters are removed, clean any dirt or grease from the filter casing.

￿Place the filters in the bottom of the vent. Press them downwards at the edge so that they clip into the frame at the top.

￿Press the 0/1 button to turn the appliance on.

If the retractable vent does not work after the cleaned filters have been replaced:

￿Press the grease filters firmly into position again.

There is a switch at the top, behind the grease filters. It prevents the ventilation system from being turned on when the grease filters are not in place.

14

Image 14
Contents En US, CA Contents Important Safety Instructions Use To Reduce the Risk of a Cooktop Grease FireEvacuate and Call the Fire Department Installation With the DAG 1000 external blower Not included Functional descriptionWith the internal DAG 500 exhaust blower Not included Description of the appliance Vent collar Temperature warning light Power level settingsDelayed shut down feature Operation Selecting the power levelDelayed shut-off feature Raising the vent / Turning on the fan Temperature warning § Stainless steel Cleaning and CareCleaning the casing Grease filters Special instructions for control buttonsCleaning the grease filters After Sales Service RepairsPage Installation Instructions Page Disposal of an old appliance Caring for the environmentDisposal of packing material Appliance dimensions Exhaust duct connection diameters Cabinet dimensions Appliance dimensions Installation using the DAG 500 internal blower Appliance dimensions Installation Installation preparationInstallation Installing the DAG 500 blower box on the front Venting direction towards the rear Mount the vent collar on the rear Installing the DAG 500 blower box on the rear Preparing the electrical connection Installation Installation with the DAG 1000 external blower Air extraction Condensate trap Only for Canada with the DAG 500 Internal blowerElectrical connection This Appliance Must be GroundedElectrical connection if using an external blower Page Alteration rights reserved Nr 045 140
Related manuals
Manual 16 pages 25.65 Kb Manual 40 pages 52.78 Kb