Electrical connection
Electrical connection if using an external blower
If using the external blower, install a connection cable between the ventilation system and the external blower.
Please follow the Operating and Installation Instructions for the DAG 1000.
Connect to the power supply as described previously.
The external blower will be connected to the additional control cable.
dai2626
Close the terminal box.
Turn the power supply back on.
Maximum load
with
DAG 500 vent motor . . . . . . . . . . 420 W
with
DAG 1000 vent motor . . . . . . . . . 210 W
Voltage . . . . . . . . . . . . . . . . . . . . . 120 V
Frequency . . . . . . . . . . . . . . . . . . 60 Hz
Circuit Rating . . . . . . . . . . . . . . . . . 15 A
Additional housing
Install a suitable UL listed cable clamp or conduit fitting into the
38