Miele DAG 1000, DA 6490, DA 6480, DAG 500 installation instructions Important Safety Instructions

Page 3

IMPORTANT SAFETY INSTRUCTIONS

READ AND SAVE THESE

INSTRUCTIONS

Keep these operating instructions in a safe place and pass them on to any future user.

Read these Instructions carefully before installing or using the Ventilation System.

￿This appliance is intended for residential use only. Use the appliance only for its intended purpose.

￿This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage.

￿CAUTION

For General Ventilating Use

Only. Do Not Use To Exhaust

Hazardous Or Explosive

Materials And Vapors.

￿This appliance is designed to vent cooking smoke and odors only.

￿This appliance is suitable for installation beside gas or electric cooking surfaces.

￿This appliance is not intended for outdoor use.

￿This appliance must not be used in a non-stationary location (e.g. on a ship).

￿WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:

￿a) Use this appliance only in the

manner intended by the manufacturer. If you have questions, contact Miele.

￿b) Before servicing or cleaning the appliance, switch power off at the service panel and lock the service disconnecting means to prevent power from being switched on accidentally. If the service disconnecting means cannot be locked, securely fasten a prominent warning device, such as a tag, to the service panel.

￿c) Be certain your appliance is properly installed and grounded by a qualified technician.

To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.

3

Image 3
Contents En US, CA Contents Important Safety Instructions To Reduce the Risk of a Cooktop Grease Fire UseEvacuate and Call the Fire Department Installation Functional description With the internal DAG 500 exhaust blower Not includedWith the DAG 1000 external blower Not included Description of the appliance Temperature warning light Power level settings Delayed shut down featureVent collar Raising the vent / Turning on the fan Selecting the power levelDelayed shut-off feature OperationTemperature warning § Cleaning and Care Cleaning the casingStainless steel Special instructions for control buttons Grease filtersCleaning the grease filters Repairs After Sales ServicePage Installation Instructions Page Caring for the environment Disposal of packing materialDisposal of an old appliance Appliance dimensions Exhaust duct connection diameters Cabinet dimensions Appliance dimensions Installation using the DAG 500 internal blower Appliance dimensions Installation preparation InstallationInstallation Installing the DAG 500 blower box on the front Venting direction towards the rear Mount the vent collar on the rear Installing the DAG 500 blower box on the rear Preparing the electrical connection Installation Installation with the DAG 1000 external blower Air extraction Only for Canada with the DAG 500 Internal blower Condensate trapThis Appliance Must be Grounded Electrical connectionElectrical connection if using an external blower Page Alteration rights reserved Nr 045 140
Related manuals
Manual 16 pages 25.65 Kb Manual 40 pages 52.78 Kb