Cleaning and Care
Before cleaning or servicing the ventilation system, disconnect it from the power supply, see "Important Safety Instructions".
Cleaning the casing
Never use abrasive cleaners, scouring pads, steel wool or caustic (oven) cleaners on the ventilation system. They will damage the surface.
All external surfaces and controls can be cleaned with a mild solution of warm water and liquid dish soap applied with a soft sponge.
Wipe dry using a soft cloth.
Do not use too much water when cleaning the controls. Water could penetrate the electronics and cause damage.
Avoid:
–cleaning agents containing lye, acids or chlorides,
–abrasive cleaning agents,
e.g. powder or cream cleansers,
–abrasive sponges, i.e. pot scourers or sponges which have been previously used with abrasive cleaning agents.
These will damage the surface.
The following instructions for cleaning "Stainless steel" surfaces should be followed in addition to the general "Cleaning the casing" instructions.
Stainless steel
Stainless steel surfaces can be cleaned using a
To help prevent resoiling, a conditioner for stainless steel can be applied.
Cleaners are available from Miele.
12