Miele DA 6490, DA 6480, DAG 500, DAG 1000 Use, To Reduce the Risk of a Cooktop Grease Fire

Page 4

IMPORTANT SAFETY INSTRUCTIONS

￿d) Before connecting the appliance to the power supply make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply.

This data must correspond to prevent appliance damage. If in doubt consult a qualified electrician.

￿e) Installation work and repairs should only be performed by a qualified technician in accordance with all applicable codes and standards. Repairs and other work by unqualified persons could be dangerous.

￿f) Only open the housing as described in the "Cleaning and care" section of this manual. Under no circumstances should any other parts of the housing be opened. Tampering with electrical connections or components and mechanical parts is highly dangerous to the user and can cause operational faults.

￿g) Before discarding an old appliance, disconnect it from the power supply and remove the power cord.

Use

￿WARNING

TO REDUCE THE RISK OF A COOKTOP GREASE FIRE:

￿a) Never leave surface units unattended at high settings. Boilovers cause smoking and greasy spillovers may ignite. Heat oils slowly on low or medium settings.

￿b) Always turn the ventilation system on when cooking at a high heat.

￿c) Clean the ventilation system frequently. Grease should not be allowed to accumulate on the fan or filter.

￿d) Use the proper pan size. Always use cookware appropriate for the size of the cooking area.

￿e) Do not flambé or grill with an open flame beside the ventilation system.

Flames could be drawn into the ventilation system by the suction and the grease filters may catch fire.

4

Image 4
Contents En US, CA Contents Important Safety Instructions Use To Reduce the Risk of a Cooktop Grease FireEvacuate and Call the Fire Department Installation With the internal DAG 500 exhaust blower Not included Functional descriptionWith the DAG 1000 external blower Not included Description of the appliance Delayed shut down feature Temperature warning light Power level settingsVent collar Selecting the power level Delayed shut-off featureOperation Raising the vent / Turning on the fanTemperature warning § Cleaning the casing Cleaning and CareStainless steel Grease filters Special instructions for control buttonsCleaning the grease filters After Sales Service RepairsPage Installation Instructions Page Disposal of packing material Caring for the environmentDisposal of an old appliance Appliance dimensions Exhaust duct connection diameters Cabinet dimensions Appliance dimensions Installation using the DAG 500 internal blower Appliance dimensions Installation Installation preparationInstallation Installing the DAG 500 blower box on the front Venting direction towards the rear Mount the vent collar on the rear Installing the DAG 500 blower box on the rear Preparing the electrical connection Installation Installation with the DAG 1000 external blower Air extraction Condensate trap Only for Canada with the DAG 500 Internal blowerElectrical connection This Appliance Must be GroundedElectrical connection if using an external blower Page Alteration rights reserved Nr 045 140
Related manuals
Manual 16 pages 25.65 Kb Manual 40 pages 52.78 Kb