Miele DA 337 I Description of the functions, By air extraction, By air recirculaton

Page 10

Description of the functions

The hood works

. . . by air extraction:

The air is drawn in, cleaned by an exter- nal filter and then passed through an in- ternal filter before being directed out- side.

The hood has a non-return flap , (see "Installation").

This flap is closed when the hood is off. No exchange of room air and out- side air can take place. When the hood is turned on the non-return flap opens for the cooking odors to be blown outside.

. . . by air recirculaton:

The air is drawn in and cleaned first by the external filter, then by the internal fil- ter before passing through an active charcoal filter. The cleaned air is then recirculated back into the kitchen through a vent in the top of the hood.

Before using the hood for the first time in recirculation mode, make sure that the active charcoal filter is in place. See Section on "Cleaning and care".

10

Image 10

Contents Operating Instructions For the DA 337 i Ventilation System Contents Disposal of packing material Caring for the environmentDisposal of an old appliance Save These Instructions and Review Them Periodically To reduce the risk of fire, use only metal ductwork To Reduce the Risk of a Range TOP Grease FireBe careful to prevent burns Use an extinguisher only if Disposal of old appliances Guide to the appliance Grease filter button Delayed Shut Down buttonActive charcoal filter button By air extraction Description of the functionsBy air recirculaton Operation Selecting the power levelTurning on the exhaust fan Turning off the exhaust fan Safety shut off featureTurning the lights on or off Active Charcoal Filter timer Grease filter timerReading the filter timer Changing the filter timer Changing the hours preset in the grease filter timerActive charcoal filter Housing Cleaning and careGrease filters External filter Internal filterReturn the filters Inserting / replacing the active charcoal filter Changing the light bulb After Sales Service Appliance dimensions Appliance dimensions Cabinet back panel Metric conversion tablePage Installation Installation accessoriesRunners Reducing collarNon-return flap Spacer blocksNon-return flap Installation procedureRecirculation mode Air extraction with integrated fanRunners Reducing collarAir extraction Hang the cabinet door Fit the runnersPosition the appliance in the cabinet Align the height of the applianceAlign the depth of the appliance Fit side spacers at the sides of the applianceInstallation Electrical connection Set up for recirculation mode connectionConnection Installation in to a cabinet with 19 mm thick walls Special installation instructionsInstalling in a 27 9/16 70 cm wide cabinet Installation Air extraction Exhaust ducting and connectionsAir extraction Electrical connection Technical data Page Page