Miele DA 337 I Turning off the exhaust fan, Turning the lights on or off, Safety shut off feature

Page 12

Operation

Turning off the exhaust fan

Use the On/Off button to turn the fan off

or

Push the deflector plate back in.

The next time the deflector plate is pulled out the hood will operate at power level ”II”.

Turning the lights on or off

The overhead lighting for the cooktop can be turned on or off independently of the fan.

Pull the deflector plate out approxi- mately 1” (3 cm).

Press the light button.

When the light is turned on the indi- cator next to the light button glows.

To turn it off

Press the light button again

or

Push the deflector plate back in.

The next time the deflector plate is pulled out the light will come back on.

Safety shut off feature

If the hood is left running for 10 hours without any buttons being pressed, it will automatically shut off. The over- head lighting will remain lit even though the fan has been shut off.

To turn the fan back on press the On/Off button.

12

Image 12

Contents Operating Instructions For the DA 337 i Ventilation System Contents Caring for the environment Disposal of packing materialDisposal of an old appliance Save These Instructions and Review Them Periodically To reduce the risk of fire, use only metal ductwork To Reduce the Risk of a Range TOP Grease FireBe careful to prevent burns Use an extinguisher only ifDisposal of old appliances Guide to the appliance Delayed Shut Down button Grease filter button Active charcoal filter button Description of the functions By air extractionBy air recirculaton Selecting the power level OperationTurning on the exhaust fan Safety shut off feature Turning off the exhaust fanTurning the lights on or off Grease filter timer Active Charcoal Filter timerReading the filter timer Changing the filter timer Changing the hours preset in the grease filter timerActive charcoal filter Cleaning and care HousingGrease filters External filter Internal filterReturn the filters Inserting / replacing the active charcoal filter Changing the light bulb After Sales Service Appliance dimensions Appliance dimensions Cabinet back panel Metric conversion tablePage Installation Installation accessoriesReducing collar Non-return flapRunners Spacer blocksInstallation procedure Recirculation modeNon-return flap Air extraction with integrated fanReducing collar RunnersAir extraction Hang the cabinet door Fit the runnersPosition the appliance in the cabinet Align the height of the applianceAlign the depth of the appliance Fit side spacers at the sides of the applianceInstallation Set up for recirculation mode connection Electrical connectionConnection Special installation instructions Installation in to a cabinet with 19 mm thick wallsInstalling in a 27 9/16 70 cm wide cabinet Installation Air extraction Exhaust ducting and connectionsAir extraction Electrical connection Technical data Page Page