Miele DA 337 I Reducing collar, Non-return flap, Runners, Spacer blocks, Cover caps, Side spacers

Installation

b1 hose clip for securing the vent ducting to the vent connection.

c1 reducing collar

for exhaust ducting of a 5” (125 mm).

d1 non-return flap

for fitting into the vent connection.

e2 runners

(1 x right, 1x left) to support the ap- pliance in the cabinet.

f2 spacer blocks

for installing the appliance in a 27 9/16” (70 cm) wide cabinet.

g2 cover caps

(1 x right, 1x left) and two inserts h for covering the suppport rails when install- ing in a 27 9/16” (70 cm) wide cabinet.

i2 side spacers

to cover the spaces at the side when in- stalling in a 23 5/8” (60 cm) wide cabinet.

jActive Charcoal Filter slot

for inserting the Active Charcoal Filter.

k1 spacer strip

to cover the gap between the rear of the appliance and the wall.

8 screws 4.0x16 mm

For securing the runners e

in a 23 5/8” (60 cm) wide cabinet.

or for securing the spacer blocks f in a 27 9/16” (70 cm) cabinet.

12 screws 3.5x9.5 mm

8 screws for securing the runners e to the spacer block f (when installing in a 27 9/16” (70 cm) wide cabinet).

4 screws for securing the side spacers i.

Screwdriver for aligning the cabinet door after the appliance has been in- stalled.

27