Installation
8 b. Spacer strip for | 9 a. Set up for vented | |
the rear of the appliance |
| extraction |
|
|
|
|
|
|
Measure the gap ”T” to be covered between the rear of the appliance and the wall.
Use a knife to trim the spacer strip supplied to measurement ”T”.
Stick the spacer strip to the under- side of the appliance.
Turn the side cover caps upwards and press into position.
Insert the panel supplied into the slot for the Active Charcoal Filter.
Secure the ventilation ducting over the vent socket on the venting hood using a hose clip.
Complete venting installation. (See ”Connection for air extraction”).
33