Miele DA 337 I Operation, Turning on the exhaust fan, Selecting the power level

Page 11

Operation

Turning on the exhaust fan

Delayed Shut Down feature

Pull the deflector plate out about 2” (5 cm).

The hood will then begin to operate at power level ”II”.

Selecting the power level

Depending on how much the air needs to be filtered, there are four power le- vels available. For normal cooking a low to medium level is usually suffi- cient. For frying or cooking food with a strong aroma the highest level is recom- mended.

Lower level

Higher level

Use the – /+buttons to select a fan power level.

The indicators show which power level has been chosen.

If the air still needs to be vented after cooking, the hood can be set to con- tinue running.

The fan motor will then turn off automati- cally after 5 or 15 minutes.

During operation, press the Delayed Shut Down button.

once = for an additional 5 minutes of venting

(the left indicator will light)

twice = for an additional 15 minutes of venting

(the right indicator will light).

The Delayed Shut Down can be can- celled at any time by pressing the but- ton a third time.

11

Image 11

Contents Operating Instructions For the DA 337 i Ventilation System Contents Disposal of an old appliance Caring for the environmentDisposal of packing material Save These Instructions and Review Them Periodically To Reduce the Risk of a Range TOP Grease Fire To reduce the risk of fire, use only metal ductworkUse an extinguisher only if Be careful to prevent burnsDisposal of old appliances Guide to the appliance Active charcoal filter button Delayed Shut Down buttonGrease filter button By air recirculaton Description of the functionsBy air extraction Turning on the exhaust fan Selecting the power levelOperation Turning the lights on or off Safety shut off featureTurning off the exhaust fan Reading the filter timer Grease filter timerActive Charcoal Filter timer Changing the hours preset in the grease filter timer Changing the filter timerActive charcoal filter Grease filters Cleaning and careHousing Internal filter External filterReturn the filters Inserting / replacing the active charcoal filter Changing the light bulb After Sales Service Appliance dimensions Appliance dimensions Metric conversion table Cabinet back panelPage Installation accessories InstallationSpacer blocks Reducing collarNon-return flap RunnersAir extraction with integrated fan Installation procedureRecirculation mode Non-return flapAir extraction Reducing collarRunners Fit the runners Hang the cabinet doorAlign the height of the appliance Position the appliance in the cabinetFit side spacers at the sides of the appliance Align the depth of the applianceInstallation Connection Set up for recirculation mode connectionElectrical connection Installing in a 27 9/16 70 cm wide cabinet Special installation instructionsInstallation in to a cabinet with 19 mm thick walls Installation Exhaust ducting and connections Air extractionAir extraction Electrical connection Technical data Page Page