Cleaning and care
Return the filters
Internal filter:
Insert the filter into the hood so that it hooks into position at the back, then push it upwards at the front and make sure it engages in position on the left and right hand sides.
Twist the grease filter catch as shown.
Unfold the grease filter and lock the catch.
External filter:
Open the filter out.
Make sure that the red plastic guides are at the front and facing up- wards.
Fit it over the locating pins at the rear and push it in until a resistance is felt.
Once the grease filters have been re- turned, press the grease filter button for approximately 4 seconds to re- set the filter timer.
18