Clock/Timer
Depending on model, your appliance may be fitted with a clock timer.
The clock/timer can:
–display the time of day.
–be used as a minute minder,
–be used to switch the oven off automatically at the end of a cooking process.
Controls
lk
l
The time you set is automatically saved to memory after about 7 seconds and the symbol will stop flashing.
Pressing the Q button is another way of saving your setting.
Setting the time of day
^Press the P and O buttons at the same time.
^Whilst the "k" point is flashing in the display, use the P or O buttons to enter the time.
The clock has a 24 hour display.
The time then counts down in minutes
The clock/timer is operated using buttons Q, P and O together with the display.
The Q button is used for selecting the "Minute minder l" and "Cooking duration l" functions.
To change the time of day shown in the display press the P and O buttons at the same time.
You can only enter a time for a particular function if its symbol is shown flashing in the display, e.g. "l", "l" or "k".
The symbol will flash for about 7 seconds. If you fail to enter the time during this 7 seconds you will have to call the symbol up in the display again.
Each press of the P or O button alters the time in one minute increments. Holding one of these buttons in will speed up the process.
If there has been a power cut the time of day has to be
To change the sound of the buzzer
There are 3 different tones.
^Press the O button until the audible tone is heard.
Each press of button O calls up a different tone.
The last tone selected will automatically be saved to memory after about 7 seconds.
If there has been a power cut the audible tone will automatically revert to the factory default setting, and will need to be reset.
22