Use
Starting a program
Select Start.
The display shows Close the door. To select another program or to add options, select Back and cancel the program with Cancel.
Start the program by closing the door.
The optical interface lights to indicate that a program is running.
The program starts and Dishes can be added appears in the display.
As long as this reference is shown, tableware can be added to the machine without impairing the cleaning result.
Cancel a program only in the first few minutes. Otherwise important program steps (e.g. the water softening) could be interrupted.
Time display
Before the program starts, the time display shows the running time of the selected program in hours and minutes. During the running program the remaining time is shown in the time display.
The running time for the same program may vary depending on the intake water temperature, load size and soiling.
When a program is selected for the first time, a time is shown which equals an average program running time with cold water.
Each time a program is run, the electronic adjusts the program running time according to the intake water temperature and the load size.
36