Miele G 2872 operating instructions Filter check, Adjust Sensor Wash

Page 45

Settings

Rinse aid

For best results the rinse aid dosage can be adjusted.

The dosage can be set between 0 and 6 ml.

The dosage set by default to 3 ml of rinse aid per program.

–Use a higher setting if spots appear on dry glassware.

–Use a lower setting if streaking appears on dishes or glasses.

Use the +/- buttons to selected the desired rinse aid amount and confirm with OK.

Filter check

This selection allows you to set the number of cycles run before the filter check message shows.

You can select between 30 and 60 cycles.

The filter check message is set by default to 40 cycles.

Select the desired number of cycles and confirm with OK.

See "Cleaning and Care - Triple filter system" for more information.

Adjust Sensor Wash

The "Sensor Wash" program can be adjusted to clean stubborn but normal soiling.

Select Yes and confirm with OK .

45

Image 45

Contents Operating Instructions Dishwasher 2872 Contents Contents Electrical Safety Important Safety InstructionsInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Display function Energy saving washing Caring for the environmentBefore using for the first time To open the doorTo close the door Language setting Welcome screenClock format Time of day setting External water softener Water softenerSalt refill message Filling the salt containerAdding rinse aid Rinse aidRinse aid refill message Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Split cutlery tray Removable spike insert Upper basketRemoving the insert Replacing the insertCoffee bar Adjustable cup racksUniversal support bar Adjusting the upper basket Foldable spikes Lower basketRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Detergent UseAdding detergent UseSelecting a program Turning onProgram guide Program When to use Program sequenceTo normally soiled UsageTurbo Selecting optionsPre-rinse SoakTime display Starting a programAt the end of a program Preparing your appliance for an extended vacaionInterrupting a program Changing a program Additional options Delay startStarting a program before the delay start has elapsed Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Language Setting the clock formatTime of day Set the time of dayPowder GelTab Water hardness Drying PlusFilter check Adjust Sensor WashReorganize program list Save options TemperatureBuzzer volume Buzzer in case of a faultBuzzer Buzzer at the end of a programBrightness Button toneMemory RemoteVisionLeaving the Settings menu Factory defaultTurning the demo mode on Turning the demo mode offRemoteVision Technical faults Frequently asked questionsThere may be a Turn the dishwasher off by Problems water intake/drain Fault Issue Possible fault Solution Optical interfaceFlashes fast Program EnergyGeneral problems with the dishwasher Issue Possible fault Solution Display turns offFollowing Dispenser at the end Issue Possible fault Solution Detergent is leftA program Detergent lidSounds Poor cleaning results Glasses and cutlery Issue Possible fault Solution Dishes are not dryAre spotted White residue isDiscolored Film cannot be wiped Off Clouding or etching Issue Possible fault Solution Glasses areOn glasses Glasses are dullComparison Tests Comparison Tests PC Update After sales serviceRepairs MieleCareTransport Page User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Grounding Instructions Electrical connectionPlumbing Waterproof systemConnection to the water supply Venting the drainage system DrainagePage Alteration rights reserved Nr 724 170 2872