Miele G 2872 operating instructions Poor cleaning results

Page 59

Frequently asked questions

Poor cleaning results

Issue

Possible fault

Solution

The dishes are not

The dishes were not loaded

See "Loading the

clean.

correctly.

dishwasher".

 

The program was not

Select a more intensive

 

powerful enough.

program, see "Program

 

 

Guide".

 

Stubborn but normal soiling

Use the function "Adjust

 

(e.g. coffee, tea).

Sensor Wash". See

 

 

"Settings ￿ - Adjust Sensor

 

 

Wash".

 

Not enough detergent was

Use more detergent, see

 

dispensed.

"Adding detergent".

 

The spray arms are blocked.

Turn the spray arm and

 

 

rearrange the dishes if

 

 

necessary.

 

The triple filter is clogged or

Clean the filter and insert it

 

not correctly inserted. The

correctly, see "User

 

spray arm jets might be

Maintenance Instructions".

 

clogged.

 

 

The drain pump or the

Clean the drain pump and

 

non-return valve is blocked.

the non-return valve, see

 

Wash water will run back

maintenance instructions.

 

into the wash cabinet.

 

Glasses and

The rinse aid dosage is set

Reduce the dosage, see

cutlery show

too high.

"Before using for the first

streaks. There is a

 

time".

bluish sheen on the

 

 

surface of glasses

 

 

and a film which

 

 

can be wiped off.

 

 

59

Image 59
Contents Operating Instructions Dishwasher 2872 Contents Contents Electrical Safety Important Safety InstructionsInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Display function Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Clock format Language settingWelcome screen Time of day setting External water softener Water softenerSalt refill message Filling the salt containerAdding rinse aid Rinse aidRinse aid refill message Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Split cutlery tray Replacing the insert Upper basketRemovable spike insert Removing the insertCoffee bar Adjustable cup racksUniversal support bar Adjusting the upper basket Foldable spikes Lower basketRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Detergent UseAdding detergent UseSelecting a program Turning onProgram guide Program When to use Program sequenceTo normally soiled UsageSoak Selecting optionsTurbo Pre-rinseTime display Starting a programInterrupting a program At the end of a programPreparing your appliance for an extended vacaion Changing a program Additional options Delay startStarting a program before the delay start has elapsed Opening the Settings menu SettingsSettings menu allows you to adjust standard settings Set the time of day Setting the clock formatLanguage Time of dayTab PowderGel Water hardness Drying PlusFilter check Adjust Sensor WashReorganize program list Save options TemperatureBuzzer at the end of a program Buzzer in case of a faultBuzzer volume BuzzerRemoteVision Button toneBrightness MemoryTurning the demo mode off Factory defaultLeaving the Settings menu Turning the demo mode onRemoteVision Technical faults Frequently asked questionsThere may be a Turn the dishwasher off by Problems water intake/drain Program Energy Issue Possible fault Solution Optical interfaceFault Flashes fastFollowing General problems with the dishwasherIssue Possible fault Solution Display turns off Detergent lid Issue Possible fault Solution Detergent is leftDispenser at the end A programSounds Poor cleaning results White residue is Issue Possible fault Solution Dishes are not dryGlasses and cutlery Are spottedGlasses are dull Issue Possible fault Solution Glasses areDiscolored Film cannot be wiped Off Clouding or etching On glassesComparison Tests Comparison Tests MieleCare After sales servicePC Update RepairsTransport Page User Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Installation Instructions Grounding Instructions Electrical connectionConnection to the water supply PlumbingWaterproof system Venting the drainage system DrainagePage Alteration rights reserved Nr 724 170 2872