Miele G 2872 Issue Possible fault Solution Dishes are not dry, Glasses and cutlery, Are spotted

Page 60

Frequently asked questions

Issue	Possible fault	Solution
Dishes are not dry,	The rinse aid setting may be	Increase the dosage, refill
glasses and cutlery	too low, or the rinse aid	the reservoir or switch the
are spotted.	reservoir is empty.	rinse aid product when
		refilling, see "Before using
		for the first time".
	Dishes were taken out too	Leave dishes in longer, see
	soon.	"Use".
	A "Tab" product was used.	Set the Detergent setting for
	These products have a low	a normal (powder or gel)
	drying effect.	detergent and add rinse aid.
	The "Tab" setting is turned	Set the Detergent setting to
	on, but a normal (powder or	the detergent used, see
	gel) product was used.	"Additional options - Tab".
White residue is	Not enough rinse aid was	Increase the dosage, see
visible on cutlery	used.	"Before using for the first
and dishes.		time".
Clouding occurs on	The salt container is empty.	Refill the salt container, see
glassware and film		"Before using for the first
can be wiped off.		"Before using for the first
can be wiped off.		time".
		time".
	The salt container lid was	Reseat it making sure it
	not correctly screwed on.	screws back on correctly.
	Unsuitable "Tab" products	Change detergent, use
	were used.	normal (powder or gel)
		detergent.
	The water softener is	See "Before using for the
	programmed on too low a	first time".
	setting.

60

Image 60

Contents Operating Instructions Dishwasher 2872 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Display function Caring for the environment Energy saving washingBefore using for the first time To open the doorTo close the door Language setting Welcome screenClock format Time of day setting Water softener External water softenerFilling the salt container Salt refill messageRinse aid Adding rinse aidRinse aid refill message Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Split cutlery tray Upper basket Removable spike insertRemoving the insert Replacing the insertAdjustable cup racks Coffee barUniversal support bar Adjusting the upper basket Lower basket Foldable spikesRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Use DetergentUse Adding detergentTurning on Selecting a programProgram When to use Program sequence Program guideUsage To normally soiledSelecting options TurboPre-rinse SoakStarting a program Time displayAt the end of a program Preparing your appliance for an extended vacaionInterrupting a program Changing a program Delay start Additional optionsStarting a program before the delay start has elapsed Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Setting the clock format LanguageTime of day Set the time of dayPowder GelTab Drying Plus Water hardnessAdjust Sensor Wash Filter checkReorganize program list Temperature Save optionsBuzzer in case of a fault Buzzer volumeBuzzer Buzzer at the end of a programButton tone BrightnessMemory RemoteVisionFactory default Leaving the Settings menuTurning the demo mode on Turning the demo mode offRemoteVision Frequently asked questions Technical faultsThere may be a Turn the dishwasher off by Problems water intake/drain Issue Possible fault Solution Optical interface FaultFlashes fast Program EnergyGeneral problems with the dishwasher Issue Possible fault Solution Display turns offFollowing Issue Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Issue Possible fault Solution Dishes are not dry Glasses and cutleryAre spotted White residue isIssue Possible fault Solution Glasses are Discolored Film cannot be wiped Off Clouding or etchingOn glasses Glasses are dullComparison Tests Comparison Tests After sales service PC UpdateRepairs MieleCareTransport Page User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Electrical connection Grounding InstructionsPlumbing Waterproof systemConnection to the water supply Drainage Venting the drainage systemPage Alteration rights reserved Nr 724 170 2872