Miele G 2872 Language, Time of day, Setting the clock format, Set the time of day

Page 42

Settings

Language

The display contents can be shown in different languages.

The displayed language can be changed by the submenu Language .

Select the desired language and confirm with OK.

The flag behind the word

Language serves as a guide when an unfamiliar language is selected. Select the respective menu with a flag until the submenu Language appears.

Time of day

This selection allows the clock to be shown as 24 or 12 hours. The clock can also be set from here.

Setting the clock format

Select Format.

Select the desired clock format and confirm with OK.

Set the time of day

Select Set manually.

Set the hour with +/- and confirm with OK. Set the minutes and confirm.

After confirming the minutes with OK, the display will revert to the previous menu.

Touch "Clear" to get back into the Settings menu.

42

Image 42

Contents Operating Instructions Dishwasher 2872 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Display function Caring for the environment Energy saving washingBefore using for the first time To open the doorTo close the door Language setting Welcome screenClock format Time of day setting Water softener External water softenerFilling the salt container Salt refill messageRinse aid Adding rinse aidRinse aid refill message Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Split cutlery tray Removing the insert Upper basketRemovable spike insert Replacing the insertAdjustable cup racks Coffee barUniversal support bar Adjusting the upper basket Lower basket Foldable spikesRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Use DetergentUse Adding detergentTurning on Selecting a programProgram When to use Program sequence Program guideUsage To normally soiledPre-rinse Selecting optionsTurbo SoakStarting a program Time displayAt the end of a program Preparing your appliance for an extended vacaionInterrupting a program Changing a program Delay start Additional optionsStarting a program before the delay start has elapsed Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Time of day Setting the clock formatLanguage Set the time of dayPowder GelTab Drying Plus Water hardnessAdjust Sensor Wash Filter checkReorganize program list Temperature Save optionsBuzzer Buzzer in case of a faultBuzzer volume Buzzer at the end of a programMemory Button toneBrightness RemoteVisionTurning the demo mode on Factory defaultLeaving the Settings menu Turning the demo mode offRemoteVision Frequently asked questions Technical faultsThere may be a Turn the dishwasher off by Problems water intake/drain Flashes fast Issue Possible fault Solution Optical interfaceFault Program EnergyGeneral problems with the dishwasher Issue Possible fault Solution Display turns offFollowing A program Issue Possible fault Solution Detergent is leftDispenser at the end Detergent lidSounds Poor cleaning results Are spotted Issue Possible fault Solution Dishes are not dryGlasses and cutlery White residue isOn glasses Issue Possible fault Solution Glasses areDiscolored Film cannot be wiped Off Clouding or etching Glasses are dullComparison Tests Comparison Tests Repairs After sales servicePC Update MieleCareTransport Page User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Electrical connection Grounding InstructionsPlumbing Waterproof systemConnection to the water supply Drainage Venting the drainage systemPage Alteration rights reserved Nr 724 170 2872