Miele G 2872 operating instructions Important Safety Instructions, Electrical Safety

Page 4

IMPORTANT SAFETY INSTRUCTIONS

WARNING –

When using your dishwasher, follow basic precautions, including the following:

Read all instructions before installation or use of the dishwasher to prevent injury and machine damage.

Use the dishwasher only for its intended purpose. This appliance is intended for residential use only.

Keep these operating instructions in a safe place and pass them on to any future user.

Electrical Safety

Before installation, make sure that the voltage and frequency listed on the data plate correspond with the household electrical supply. This data must correspond to prevent injury and machine damage. Consult a qualified electrician if in doubt.

Before installation or service,

disconnect the power supply to the work area by unplugging the unit, "tripping" the circuit breaker or removing the fuse.

Do not use an extension cord to connect this appliance to electricity. Extension cords do not guarantee the required safety of the appliance (e.g. danger of overheating).

Be certain your appliance is properly installed and grounded by a qualified technician. To guarantee the electrical safety of this appliance continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met. If there is any doubt, have the electrical system of the house checked by a qualified electrician.

4

Image 4

Contents Operating Instructions Dishwasher 2872 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Display function Caring for the environment Energy saving washingTo open the door Before using for the first timeTo close the door Welcome screen Language settingClock format Time of day setting Water softener External water softenerFilling the salt container Salt refill messageRinse aid Adding rinse aidRinse aid refill message Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Split cutlery tray Upper basket Removable spike insertRemoving the insert Replacing the insertAdjustable cup racks Coffee barUniversal support bar Adjusting the upper basket Lower basket Foldable spikesRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Use DetergentUse Adding detergentTurning on Selecting a programProgram When to use Program sequence Program guideUsage To normally soiledSelecting options TurboPre-rinse SoakStarting a program Time displayPreparing your appliance for an extended vacaion At the end of a programInterrupting a program Changing a program Delay start Additional optionsStarting a program before the delay start has elapsed Settings menu allows you to adjust standard settings SettingsOpening the Settings menu Setting the clock format LanguageTime of day Set the time of dayGel PowderTab Drying Plus Water hardnessAdjust Sensor Wash Filter checkReorganize program list Temperature Save optionsBuzzer in case of a fault Buzzer volumeBuzzer Buzzer at the end of a programButton tone BrightnessMemory RemoteVisionFactory default Leaving the Settings menuTurning the demo mode on Turning the demo mode offRemoteVision Frequently asked questions Technical faultsThere may be a Turn the dishwasher off by Problems water intake/drain Issue Possible fault Solution Optical interface FaultFlashes fast Program EnergyIssue Possible fault Solution Display turns off General problems with the dishwasherFollowing Issue Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Issue Possible fault Solution Dishes are not dry Glasses and cutleryAre spotted White residue isIssue Possible fault Solution Glasses are Discolored Film cannot be wiped Off Clouding or etchingOn glasses Glasses are dullComparison Tests Comparison Tests After sales service PC UpdateRepairs MieleCareTransport Page User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Electrical connection Grounding InstructionsWaterproof system PlumbingConnection to the water supply Drainage Venting the drainage systemPage Alteration rights reserved Nr 724 170 2872