Miele G 2872 Dealer, Factory default, Leaving the Settings menu, Turning the demo mode on

Page 50

Settings

Dealer

Demo modes are only for showrooms.

The dishwasher has three demo programs for showrooms.

The programs "Demo mode" and "Endless demo mode" show the use and function range of the dishwasher.

–Demo mode:

The program is started by pressing any button. It runs once and must be started again.

–Endless demo mode:

The program starts as soon as it is activated and runs in a loop until it is turned off.

–Demo wash sound:

The program activates the pumps to demonstrate the wash sound.

–Trade show mode:

Once the machine is used for the first time this option is disabled in the display.

–Demo Drying Plus:

The door opens automatically.

Turning the demo mode on

Select the desired option, confirm with OK.

Confirm the following messages with OK.

Press any button to start the selected demo mode.

To cancel the demo mode press any button again and confirm with OK.

Turning the demo mode off

Select Off to deactivate the demo mode and confirm with OK.

Confirm the message Deactivate demo mode? with OK.

Factory default

All settings can be reset to factory default.

Confirm the message Reset to factory default? with OK.

Confirm the information All settings are reset to factory default with OK.

Leaving the "Settings menu"

To leave the "Settings " touch the "Clear" control. The main menu shows.

50

Image 50

Contents Operating Instructions Dishwasher 2872 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Display function Caring for the environment Energy saving washingTo close the door Before using for the first timeTo open the door Clock format Language settingWelcome screen Time of day setting Water softener External water softenerFilling the salt container Salt refill messageRinse aid Adding rinse aidRinse aid refill message Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Split cutlery tray Removing the insert Upper basketRemovable spike insert Replacing the insertAdjustable cup racks Coffee barUniversal support bar Adjusting the upper basket Lower basket Foldable spikesRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Use DetergentUse Adding detergentTurning on Selecting a programProgram When to use Program sequence Program guideUsage To normally soiledPre-rinse Selecting optionsTurbo SoakStarting a program Time displayInterrupting a program At the end of a programPreparing your appliance for an extended vacaion Changing a program Delay start Additional optionsStarting a program before the delay start has elapsed Opening the Settings menu SettingsSettings menu allows you to adjust standard settings Time of day Setting the clock formatLanguage Set the time of dayTab PowderGel Drying Plus Water hardnessAdjust Sensor Wash Filter checkReorganize program list Temperature Save optionsBuzzer Buzzer in case of a faultBuzzer volume Buzzer at the end of a programMemory Button toneBrightness RemoteVisionTurning the demo mode on Factory defaultLeaving the Settings menu Turning the demo mode offRemoteVision Frequently asked questions Technical faultsThere may be a Turn the dishwasher off by Problems water intake/drain Flashes fast Issue Possible fault Solution Optical interfaceFault Program EnergyFollowing General problems with the dishwasherIssue Possible fault Solution Display turns off A program Issue Possible fault Solution Detergent is leftDispenser at the end Detergent lidSounds Poor cleaning results Are spotted Issue Possible fault Solution Dishes are not dryGlasses and cutlery White residue isOn glasses Issue Possible fault Solution Glasses areDiscolored Film cannot be wiped Off Clouding or etching Glasses are dullComparison Tests Comparison Tests Repairs After sales servicePC Update MieleCareTransport Page User Maintenance Instructions Wash cabinet Cleaning and CareExterior Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Installation Instructions Electrical connection Grounding InstructionsConnection to the water supply PlumbingWaterproof system Drainage Venting the drainage systemPage Alteration rights reserved Nr 724 170 2872