Miele G 2872 Issue Possible fault Solution Optical interface, Flashes fast, Program Energy, Fault

Page 55

Frequently asked questions

	Issue	Possible fault	Solution
	The optical interface	The intake water does	– Restart the program.
	flashes fast.	not have a minimum	– If the fault is displayed
	The program "Energy	temperature of 115°F	again, use a different
	Saver" displays the	(45°C). See "Plumbing -	program.
	fault:	Connection to the water
	Water intake temp. too	supply".
	low
	The optical interface		Before fixing the fault:
	flashes fast, the		– Turn the dishwasher off .
	buzzer sounds and the	Fault F11:	– Clean the triple filter.
	display shows the	Fault in the water drain.	– Clean the drain pump and
	fault:	Fault in the water drain.	– Clean the drain pump and
	fault:	There might be water in	the non-return valve.
	Drain fault F11	There might be water in	the non-return valve.
	Drain fault F11	the wash cabinet.	See "User Maintenance
		the wash cabinet.

			Instructions" for more
			information on the above.
			– Remove any kinks in the
			drain hose.

55

Image 55

Contents Operating Instructions Dishwasher 2872 Contents Contents Electrical Safety Important Safety InstructionsInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Display function Energy saving washing Caring for the environmentTo open the door Before using for the first timeTo close the door Welcome screen Language settingClock format Time of day setting External water softener Water softenerSalt refill message Filling the salt containerAdding rinse aid Rinse aidRinse aid refill message Loading the dishwasher Glassware Items not recommended for dishwashingSilver and aluminum Split cutlery tray Replacing the insert Upper basketRemovable spike insert Removing the insertCoffee bar Adjustable cup racksUniversal support bar Adjusting the upper basket Foldable spikes Lower basketRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Detergent UseAdding detergent UseSelecting a program Turning onProgram guide Program When to use Program sequenceTo normally soiled UsageSoak Selecting optionsTurbo Pre-rinseTime display Starting a programPreparing your appliance for an extended vacaion At the end of a programInterrupting a program Changing a program Additional options Delay startStarting a program before the delay start has elapsed Settings menu allows you to adjust standard settings SettingsOpening the Settings menu Set the time of day Setting the clock formatLanguage Time of dayGel PowderTab Water hardness Drying PlusFilter check Adjust Sensor WashReorganize program list Save options TemperatureBuzzer at the end of a program Buzzer in case of a faultBuzzer volume BuzzerRemoteVision Button toneBrightness MemoryTurning the demo mode off Factory defaultLeaving the Settings menu Turning the demo mode onRemoteVision Technical faults Frequently asked questionsThere may be a Turn the dishwasher off by Problems water intake/drain Program Energy Issue Possible fault Solution Optical interfaceFault Flashes fastIssue Possible fault Solution Display turns off General problems with the dishwasherFollowing Detergent lid Issue Possible fault Solution Detergent is leftDispenser at the end A programSounds Poor cleaning results White residue is Issue Possible fault Solution Dishes are not dryGlasses and cutlery Are spottedGlasses are dull Issue Possible fault Solution Glasses areDiscolored Film cannot be wiped Off Clouding or etching On glassesComparison Tests Comparison Tests MieleCare After sales servicePC Update RepairsTransport Page User Maintenance Instructions Door and the door seal Cleaning and CareExterior Wash cabinetIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray armsInstalling an in-line water filter Cleaning the water inlet filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Grounding Instructions Electrical connectionWaterproof system PlumbingConnection to the water supply Venting the drainage system DrainagePage Alteration rights reserved Nr 724 170 2872