SUPER MICRO Computer X9DRG-HTF, X9DRG-HF user manual Bios Error Beep Codes, X9 Ipmi Error Codes

Appendix A: BIOS POST Error Codes

Appendix A

BIOS Error Beep Codes

During the POST (Power-On Self-Test) routines, which are performed at each system boot, errors may occur.

Non-fatal errors are those which, in most cases, allow the system to continue to boot. The error messages normally appear on the screen.

Fatal errors will not allow the system to continue with bootup procedure. If a fatal error occurs, you should consult with your system manufacturer for possible repairs.

These fatal errors are usually communicated through a series of audible beeps. The numbers on the fatal error list correspond to the number of beeps for the corresponding error.

A-1 BIOS Error Beep Codes

BIOS Error Beep Codes

Beep Code/LED

1 beep

5 short beeps + 1 long beep

5 beeps

Error Message

Refresh

Memory error

No Con-In or No Con- Out devices

Description

Ready to boot

No memory detected in the system

Con-In: USB or PS/2 keyboard, PCI or Serial Console Redirection, IPMI KVM or SOL

Con-Out: Video Controller, PCI or Serial Console Redirection, IPMI SOL

1 Continuous Beep

X9 IPMI Error Codes

System OH System Overheat

A-1