SUPER MICRO Computer X9DRG-HF, X9DRG-HTF Management Engine ME Recovery, Manufacture Mode Select

X9DRG-HF/X9DRG-HTF Motherboard User’s Manual

Management Engine (ME) Recovery

Use Jumper JPME1 to select ME Firm- ware Recovery mode, which will limit resource allocation for essential system operation only in order to maintain nor- mal power operation and management. In the single operation mode, online upgrade will be available via Recovery mode. See the table on the right for jumper settings.

	ME Recovery
	Jumper Settings
Jumper Setting Definition
1-2		Normal (Default)
2-3		ME Recovery

Manufacture Mode Select

Close pin 2 and pin 3 of Jumper JPME2 to bypass SPI flash security and force the system to operate in the Manufac- ture Mode, allowing the user to flash the system firmware from a host server for system setting modifications. See the table on the right for jumper settings.

	ME Mode Select
	Jumper Settings
Jumper Setting Definition
1-2		Normal (Default)
2-3		Manufacture Mode

A.JPME1

B.JPME2

B

A

2-34