Miele G 2872 Buzzer at the end of a program, Buzzer in case of a fault, Buzzer volume

Page 48

Settings ￿

Buzzer

When the buzzer is activated, a tone sounds at the end of a program and if a fault occurs.

The buzzer at the end of a program is turned on by default.

Buzzer at the end of a program

The buzzer at the end of a program sounds five times in intervals with a brief break in between. The buzzer sounds up to one hour if the dishwasher in not turned off.

Buzzer in case of a fault

The buzzer for a fault sounds continuously. The buzzer sounds up to two minutes if the dishwasher is not turned off or the fault is fixed.

The buzzer for a fault cannot be set to off.

Buzzer volume

Two buzzer volumes can be selected or the buzzer can be turned off.

Off

The buzzer tone at the end of a program is turned off.

Soft

The tone sounds in a soft volume.

Loud

The tone sounds in a loud volume.

￿Select the desired volume or deactivate the buzzer.

￿Confirm with OK.

48

Image 48
Contents Operating Instructions Dishwasher 2872 Contents Contents Important Safety Instructions Electrical SafetyInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Display function Caring for the environment Energy saving washingBefore using for the first time To open the doorTo close the door Language setting Welcome screenClock format Time of day setting Water softener External water softenerFilling the salt container Salt refill messageRinse aid Adding rinse aidRinse aid refill message Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Split cutlery tray Upper basket Removable spike insertRemoving the insert Replacing the insertAdjustable cup racks Coffee barUniversal support bar Adjusting the upper basket Lower basket Foldable spikesRemovable PlateGuard Plus with StemGuard Vase / Bottle insert Basket accessories Use DetergentUse Adding detergentTurning on Selecting a programProgram When to use Program sequence Program guideUsage To normally soiledSelecting options TurboPre-rinse SoakStarting a program Time displayAt the end of a program Preparing your appliance for an extended vacaionInterrupting a program Changing a program Delay start Additional optionsStarting a program before the delay start has elapsed Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Setting the clock format LanguageTime of day Set the time of dayPowder GelTab Drying Plus Water hardnessAdjust Sensor Wash Filter checkReorganize program list Temperature Save optionsBuzzer in case of a fault Buzzer volumeBuzzer Buzzer at the end of a programButton tone BrightnessMemory RemoteVisionFactory default Leaving the Settings menuTurning the demo mode on Turning the demo mode offRemoteVision Frequently asked questions Technical faultsThere may be a Turn the dishwasher off by Problems water intake/drain Issue Possible fault Solution Optical interface FaultFlashes fast Program EnergyGeneral problems with the dishwasher Issue Possible fault Solution Display turns offFollowing Issue Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Issue Possible fault Solution Dishes are not dry Glasses and cutleryAre spotted White residue isIssue Possible fault Solution Glasses are Discolored Film cannot be wiped Off Clouding or etchingOn glasses Glasses are dullComparison Tests Comparison Tests After sales service PC UpdateRepairs MieleCareTransport Page User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Electrical connection Grounding InstructionsPlumbing Waterproof systemConnection to the water supply Drainage Venting the drainage systemPage Alteration rights reserved Nr 724 170 2872