Russound CAV6.6-S2 instruction manual UNO System Keypad Port Connection, Making Connections

UNO System Keypad Port Connection

The UNO System Keypad Ports are located on the back of the CAV6.6 in the top left corner. Connections made at the UNO Keypad Ports are made using CAT-5 T568A RJ-45 wire configura- tion. CAT-5 is color-coded for ease of installa- tion. For a clean installation when wiring from an UNO System Keypad Port use an RJ-45 CAT-5 patch cable to connect from the keypad port to an RJ-45 Wall Plate (optional). Using the same CAT-5 T568A RJ-45 wiring configuration, use

INSTALLER

MAKING CONNECTIONS

CAT-5 from the RJ-45 Wall Plate to the keypad. If using more than one keypad on a zone, con- nect a SA-ZX3 UNO System Keypad Splitter (optional) directly to the UNO System Keypad Port instead of going through the wall plate. Always use the CAT-5 T568A RJ-45 wire configu- ration when wiring any of the UNO System Keypad Ports.

(See Sample System Configuration 3, page 89)

29